FORMULATION AND PROCESS DEVELOPMENT OF FLAT PRESSED WOOD POLYETHYLENE COMPOSITES.

Código QR

FORMULATION AND PROCESS DEVELOPMENT OF FLAT PRESSED WOOD POLYETHYLENE COMPOSITES.

Detalles Bibliográficos
Autor principal:	WOLCOTT, MICHAEL P.
Formato:	Artículo
Lenguaje:	Spanish
Materias:	MADERAS FORMULACION COMPUESTOS POLIETILENO MATERIALES PROPIEDADES FISICAS PROPIEDADES MECANICAS Artículos de revista

Ejemplares similares

Effects of recycled materials on the properties of wood fiber-polyethylene composites--Part 2 : effect of a compatibilizer on the wettability of birch plywood and polyolefins.
por: Hwang, Chin-yin

Adsorption and desorption performance of two commercial wood plastic composites.
por: Adebayo, Adebola B.

Polyethylene /
por: Kresser, Theodore O. J., et al.
Publicado: (1957)

SIMULATION OF THE MAT FORMATION PROCESS.
por: ZOMBORI, BALAZS G.

MULTILAMINAR WOOD MANUFACTURING PROCESS AND MAIN PHYSICAL MECHANICAL PROPERTIES.
por: CASTRO, GAETARIO

Caracterización mecánica y morfológica de termoplásticos reciclados espumados reforzados con sub productos de madera = Morphological and mechanical caracterization of recycled thermoplastic foams reinforced with wood sub-products /

Effects of raw materials on the properties of wood fiber-polyethylene composites--Part 3 : effect of a compatibilizer and wood adhesive on the interfacial adhesion of wood/plastic composites.
por: Hwang, Chin-yin

Wood handbook : wood as an engineering material
Publicado: (1974)

Propiedades físicas y mecánicas de compuestos de polietileno reciclado y harinas de corteza y madera de Pinus Radiata fabricados mediante moldeo por inyección /
por: Moya Villablanca, Cristian

Practical guide to polyethylene /
por: Vasile, Cornelia
Publicado: (2005)

Textbook of wood technology
por: Panshin, Alexis John
Publicado: (1970)

Manufacture of wood-cement composites from Acacia Mangium. Part II : Use of accelerators in the manufacture of wood - wool cement boards from A. Mangium.
por: Semple, Kate E.

Mechanical properties of small-scale laminated wood composite poles : effects of taper and webs.
por: Piao, Cheng

Compatibilizer selection to improve mechanical and moisture properties of extruded wood-HDPE composites.
por: Chowdhury, Mohammed Jahangir A.

Textbook of wood technology; structure, identification, properties, and uses of the comercial woods of the United States and Canadá
por: Panshin, Alexis John
Publicado: (1980)

Modelling of transport processes in wood : development and validation of a multiscale homogenization model for transport properties of softwood /
por: Eitelberger, Johannes
Publicado: (2011)

Suitability of fibers from mountain pine beetle attacked wood in wood-cement composite materials.
por: Chang, Feng-Cheng

Time dependent and nonlinear effects in polymers and composites /
Publicado: (2000)

Finite element modeling of small-scale tapered wood-laminated composite poles with biomimicry features.
por: Piao, Cheng

TENSILE AND DIMENSIONAL PROPERTIES OF WOOD STRANDS MADE FROM PLANTATION SOUTHERN PINE LUMBER.
por: QINGLIN WU... [ET AL]

FRACTURE OF WOOD COMPOSITES AND WOOD ADHESIVE JOINTS A COMPARATIVE REVIEW.
por: CONRAD, MICHAEL P.C.

Elm breeding for DED resistance, the Italian clones and their wood properties
por: Santini, A.=700 1 Fagnani, A.

Selected properties of wood strand and oriented stranboard from small - diameter southern pine trees.
por: Han, Guangping

Optimization of pressing parameters for mechanically surface - densified aspen.
por: Lamason, Clevan

SOME PERFORMANCE CHARACTERISTICS OF ASPEN KENAF COMPOSITE BOARDS.
por: BAJWA, DILPREET S.

Selected mechanical and physical properties of Chinese tallow tree juvenile wood.
por: Shupe, Todd F.

Polietileno (I): propiedades y sistemas cataliticos
por: Fernandez, B. del Amo

Modeling wood strands as multi-layer composites : bending and tension loads.
por: Hindman, Daniel P.

Hardneá test for wax formulations from jojoba wax, para ffin, poly propylene
por: Miwa, T.K.

Interior flooring material made of wood particle-plastic composites by flat-platen pressing.
por: Chen, Ho- Chin

Theoretical modeling of bonding characteristics and performance of wood composites. Part IV. Internal bond strengt.
por: Dai, C.

THERMALLY CONDUCTIVE CARBON FILLER IN WOOD BASED COMPOSITES.
por: MATUANA, LAURENT M.

Hybrid poplar as a feedstock for wood-plastic composites.
por: Englund, Karl

Modificacion de las propiedades electricas de los plasticos
por: Guerrero, C.

Comparison of the mechanical properties of branch and stem wood for three specie.
por: Gurau, Lidia

MECHANICAL PROPERTIES IN RELATION TO SELECTED WOOD CHARACTERISTICS OF BLACK SPRUCE.
por: ALTEYRAC, JEROME

Compressive deformation process of japanese cedar (Cryptomeria Japonica).
por: Fukuta, Satoshi

Optimization of methods for using polyethylene glycol as a non - permeating osmoticum for the induction of microspore embryogenesis in the Brassicaceae.
por: Ferrie, A.

IMPROVING THE DEFLECTION CHARACTERISTICS OF SHELVES AND SIDE WALLS IN PANEL BASED CABINET FURNITURE.
por: DENIZLI TANKUT, NURGUL

Ure and performance of spinning solution prepared from liquefied wood.
por: Ma, Xiaojun