Modeling wood strands as multi-layer composites : bending and tension loads.

Código QR

Modeling wood strands as multi-layer composites : bending and tension loads.

Detalles Bibliográficos
Autor principal:	Hindman, Daniel P.
Otros Autores:	Nam Lee, Jong
Formato:	Artículo
Lenguaje:	Spanish
Materias:	Propiedades mecánicas Modelado Flexión Especies maderables Artículos de revista

Ejemplares similares

Predicting performance of oriented strand-board under concentrated static loading conditions using finite element modeling.
por: Chen, Zheng

Comparison of the mechanical properties of branch and stem wood for three specie.
por: Gurau, Lidia

Relationship between bending and tensile stress distribution in veneer plywood.
por: Kljak, Jaroslav

Theoretical modeling of bonding characteristics and performance of wood composites. Part IV. Internal bond strengt.
por: Dai, C.

Bending creep of small samples from parallel strand lumber.
por: Lee, Andy W.C.

EFFECT OF SHEAR DEFLECTION ON BENDING PROPERTIES OF COMPRESSED WOOD.
por: KUBOJIMA, YOSHITAKA

ANALYTICAL MODELING OF RHEOLOGICAL POSTBUCKLING BEHAVIOR OF WOOD-BASED COMPOSITE PANELS UNDER CYCLIC HYGRO-LOADING.
por: KANG, WOOK

VARIACION DEL MODULO DE RUPTURA EN CINCO ESPECIES MADERABLES.
por: HOYLE, ROBERT

SEVERAL EXAMINATIONS ON THE STATIC BENDING TEST METHODS OF WOOD USING TODOMATSU (JAPANESE FIR).
por: YOSHIHARA, HIROSHI

MODELLING OF AIRFLOW AND WOOD DRYING INSIDE A KILN : A COMPREHENSIVE APPROACH.
por: POUGATCH, KONSTANTIN

TENSILE AND DIMENSIONAL PROPERTIES OF WOOD STRANDS MADE FROM PLANTATION SOUTHERN PINE LUMBER.
por: QINGLIN WU... [ET AL]

Analysis of strand characteristics and alignment of commercial OSB panels.
por: Chen, Siguo

WITHDRAWAL AND BENDING PERFORMANCE OF DOWEL JOINTS IN FURNITURE GRADE PINE PLYWOOD.
por: JILEI ZHANG

Selected properties of wood strand and oriented stranboard from small - diameter southern pine trees.
por: Han, Guangping

Theoretical modeling of bonding characteristics and performance of wood composites. Part II : Resin distribution.
por: Dai, Chunping

FUZZY KNOWLEDGE-BASED MODELING AND STATISTICAL REGRESSION IN ABRASIVE WOOD MACHINING; ANDRES CARRANO ... [ET AL.].

A new measure of strand alignment with respect to bending stiffness.
por: Siguo Chen ... [Et al.]

SHEAR FORCE AND BENDING MOMENT CAPACITIES OF JOINTS CONSTRUCTED WITH GLUED CORNER BLOCKS.
por: KASAL, A.

Feasibility of using saltcedar as a filler in injection-molded polyethylene composites.
por: Clemons, Craig M.

Improvement of prediction accuracy of glulam modulus of elasticity by considering neutral axis shift in bending.
por: Shim, Kug-Bo

Theoretical modeling of bonding characteristics and performance of wood composites. Part III : Bonding strength between two wood element.
por: He, Guangbo

Efecto de las caracteristicas de harina de madera en las propiedades físico-mecánicas y térmicas de polipropileno reciclado = Effects of the characteristics of wood flour on the physico-mechanical and thermal properties of recycled polypropylene /

FORMULATION AND PROCESS DEVELOPMENT OF FLAT PRESSED WOOD POLYETHYLENE COMPOSITES.
por: WOLCOTT, MICHAEL P.

Una Teoria del pandeo lateral de arcos /
por: Octavio de Toledo, José María, et al.
Publicado: (1979)

Technical note : a preliminary study on the bending stiffness of chemically treated wood material for structural composite lumber.
por: McConnell, T. Eric

Theoretical modeling of bonding characteristics and performance of wood composites. Part I : Inter-element contact.
por: Dai, Chunping

CORRELACION ENTRE PRUEBAS DESTRUCTIVAS Y PRUEBAS NO DESTRUCTIVAS PARA MEDIR PROPIEDADES MECANICAS DEL CONCRETO HIDRAULICO /
por: MUÑOZ BARRANTES, JORGE
Publicado: (2003)

Wood-adhesive interface characterization and modeling in engineered wood floorin.
por: Belleville, Benoît

MEASUREMENT AND PREDICTION OF LATERAL TORSIONAL BUCKLING LOADS OF COMPOSITE WOOD MATERIALS : RECTANGULAR SECTIONS.
por: HINDMAN, DANIEL P.

Bending performance of composite wood I-joist/oriented strand board panel assemblies /
por: Davids, William G.

Tableros de partículas fabricados con residuos industriales de madera de Pinus patula = Particle boards manufactured from industrial residues of Pinus Patula Wood /

MEASUREMENT AND PREDICTION OF LATERAL TORSIONAL BUCKLING LOADS OF COMPOSITE WOOD MATERIALS : L JOIST SECTIONS.
por: HINDMAN, DANIEL P.

Polypropylene composites filled with steam-exploded wood fibers from beetle-killed loblolly Pine by compression-molding.
por: Yin, Suzhou

Efectos de la flexibilidad del medio soportante en el análisis de edificios /
por: Salazar Fallas, Román, et al.
Publicado: (1981)

Effect of incorporating chinese poplar in wood chips on fiber refining /
por: Hua, Jun

BENDING FATIGUE LIFE OF TWO PIN DOWEL JOINTS IN FURNITURE GRADE PINE PLYWWOD.
por: ZHANG, JILEI

Compatibilizer selection to improve mechanical and moisture properties of extruded wood-HDPE composites.
por: Chowdhury, Mohammed Jahangir A.

Hydraulic power system analysis /
por: Akers, Arthur

Effect of strand geometry and wood species on strandboard mechanical properties.
por: Beck, Katherina

Suitability of fibers from mountain pine beetle attacked wood in wood-cement composite materials.
por: Chang, Feng-Cheng