Improving the sanding process of black spruce wood for surface quality and water-based coating adhesion /

QR Code

Improving the sanding process of black spruce wood for surface quality and water-based coating adhesion /

Bibliographic Details
Main Author:	Cool, Julie
Other Authors:	Hernández, Roger E.
Format:	Article
Language:	English
Subjects:	Humedad de la madera Madera > Recubrimiento Madera > Tratamiento Artículos de revista

Similar Items

Performance of three alternative surfacing processes on black spruce wood and therir effects on water-bassed coating adhesion /
by: Cool, Julie

Beschichtungen für Holz im Außenbereich = Coatings for wood in exterior use.
by: Grüll, Gerhard

Influence of surface roughness and species on bond strength between the wood and the finish.
by: Ozdemir, Turgay

Spinning disk atomization of wood resin-adhesives : I. spray characteristics, atomization mechanism, and resin efficiency.
by: Xuelian Zhang, Lech Muszynski, Douglas J. Gardner

MECHANICAL PROPERTIES IN RELATION TO SELECTED WOOD CHARACTERISTICS OF BLACK SPRUCE.
by: ALTEYRAC, JEROME

Increasing mold resistance of strand boards with spruce heartwood.
by: Yang, Dian-Qing

EFFECT OF MOISTURE CONTENT AND TEMPERATURE ON TENSION STRENGTH OF FINGERJOINTED BLACK SPRUCE LUMBER.
by: ST-PIERRE, BENOIT

SURFACE ENERGY OF EXTRACTED AND NON-EXTRACTED NORWAY SPRUCE WOOD PARTICLES STUDIED BY INVERSE GAS CHROMATOGRAPHY (IGC).
by: WALINDER, MAGNUS E. P.

Improvement of technological quality of eucalypt wood by heat treatment in air at 170-200 C..
by: Esteves, Bruno

Wood-adhesive interface characterization and modeling in engineered wood floorin.
by: Belleville, Benoît

IMPROVEMENTS IN THE FRACTURE CLEAVAGE TESTING OF ADHESIVELY BONDED WOOD.
by: GAGLIANO, JERONE M.

Finite element modeling of laminate wood composites hygromechanical behavior considering diffusion effects in the adhesive layers.
by: Deteix, Jean

Transverse mechanical behavior of wood under high temperature and pressurized steam.
by: Wanli Cheng ... [Et al.]

Effects of outdoor weathering and wood properties on liquid water absorption in uncoated Norway spruce cladding /
by: Vestol, Geir I.

Recubrimientos de madera en paredes y techos
Published: (1969)

STRUCTURAL PERFORMANCE OF FINGER JOINTED BLACK SPRUCE LUMBER WITH DIFFERENT JOINT CONFIGURATIONS.
by: BUSTOS, CECILIA

COMPARATIVE STUDY OF FOUR ADHESIVE USED AS BINDER IN ENGINEERED WOOD PARQUET FLOORING; PIERRE BLANCHET, ROBERT BEAUREGARD, ALEXANDRE ERB ... [ET AL.].
by: BLANCHET, PIERRE

Prefinished oak flooring surface checking and physical properties.
by: Blanchet, Pierre

SURFACE STRUCTURE AND DYNAMIC ADHESIVE WETTABILITY OF WHEAT STRAW.
by: LIU, ZHI MING

Compatibilizer selection to improve mechanical and moisture properties of extruded wood-HDPE composites.
by: Chowdhury, Mohammed Jahangir A.

Models for predicting lumber grade yield using tree characteristics in black spruce.
by: Liu, Chuangmin

EFFECTS OF CURING TIME AND END PRESSURE ON THE TENSILE STRENGTH OF FINGER JOINED BLACK SPRUCE LUMBER.
by: BUSTOS, CECILIA

Improvement of photoprotection of wood coatings by using inorganic nanoparticles as ultraviolet absorbers /

THE INFLUENCE OF DRYING METHOD ON THE WARP BEHAVIOR OF NORWAY SPRUCE (PICEA ABIES L. KARST) SAWN TIMBER.
by: KLAIBER, VOLKER

FRACTURE OF WOOD COMPOSITES AND WOOD ADHESIVE JOINTS A COMPARATIVE REVIEW.
by: CONRAD, MICHAEL P.C.

Technical note : equilibrium moisture content of norway spruce at low pressure.
by: Chen, Zhangjing

Effect of wood moisture content and rod dosage on boron or fluoride movement through Douglas-fir heartwood.
by: Cabrera, Yohanna

Effect of extractives on water sorption and durability of wood-plastic composites.
by: Kim, Jae-Woo

A percolation model for electrical conduction in wood with implications for wood-water relation.
by: Zelinka, Samuel L.

Wood handbook : wood as an engineering material
Published: (1974)

Experimental equilibrium moisture content of wood under vacuum.
by: Yi, Song-Lin

Transport processes in wood /
by: Siau, John F.
Published: (1984)

Effect of processing parameters, resin, and wax loading on water vapor sorption of wood strand.
by: Neimsuwan, Trairat

Surface characteristics of wood pre-impregnated with borates before varnish coating.
by: Toker, Hilmi

A mechanical evaluation of Alaska-grown Sitka spruce.
by: Bannister, John

Wood and wood products
by: Spencer, Albert G
Published: (1975)

EFFECT OF REMOVAL OF DEEP VALLEYS ON THE EVALUATION OF MACHINED SURFACES OF WOOD.
by: Y. FUJIWARA

Wood preservation
by: Hunt, George M
Published: (1967)

HYDROTHERMAL TREATMENT OF CREOSOTE-IMPREGNATED WOOD.
by: CATALLO, JAMES

Adsorption and desorption performance of two commercial wood plastic composites.
by: Adebayo, Adebola B.