MOISTURE DEPENDENT SOFTENING BEHAVIOR OF WOOD.

Código QR

MOISTURE DEPENDENT SOFTENING BEHAVIOR OF WOOD.

Detalles Bibliográficos
Autor principal:	LENTH, CHRISTOPHER A.
Formato:	Artículo
Lenguaje:	Spanish
Materias:	VISCOELESTICIDAD MADERAS ALTAS TEMPERATURAS Artículos de revista

Ejemplares similares

Cell wall porosity in norway spruce wood as affected by high-temperature drying /
por: Borrega, Marc

Transverse mechanical behavior of wood under high temperature and pressurized steam.
por: Wanli Cheng ... [Et al.]

SENSIBLE HEATING APPROACH TO CONTROLLING THE EQUILIBRIUM MOISTURE CONTENT OF WOOD.
por: PERALTA, PERRY

Effect of cyclic long-term temperature exposure on the bending strength of lumbe.
por: Green, D. W.

TEMPERATURE AND MOISTURE INFLUENCE ON COMPRESSION-RECIVERY BEHAVIOR OF WOOD.
por: WOLCOTT, MICHAEL

Characterization of tangential shrinkage stresses of wood during drying under superheated steam above 100 ºC..
por: Cheng, Wanli

EFFECTS OF MOISTURE AND TEMPERATURE CYCLING ON MATERIAL PROPERTIES OF A WOOD/PLASTIC COMPOSITE.
por: WANG, WEIHONG

Progress in high temperature physics and chemistry
por: Rouse, Carl A., et al.
Publicado: (1968)

Changes in vibrational properties of wetwood of japanese fir (Abies Sachalinensis Mast) with time during drying.
por: Ohsaki, Hisashi

Las altas temperaturas
por: Lachnitt, Jacques
Publicado: (1966)

Effect of temperature on the dynamic mechanical properties of resin film and wood.
por: Yucheng Peng, Sheldon G. Shi, Moon G. Kim

Temperatures Very Low and Very High
por: Zemansky, Mark W.
Publicado: (1964)

Temperaturas muy bajas y muy altas /
por: Zemansky, Mark W.
Publicado: (1968)

Temperatures very low and very high
por: Zemansky, Mark W
Publicado: (1964)

Efecto de la velocidad de deformacion en la cinetica de restauracion de una aleacion comercial Al-1% Mn deformada bajo condiciones de trabajo en caliente /
por: Rojas Meza, Gerardo Antonio, et al.
Publicado: (1987)

THERMALLY CONDUCTIVE CARBON FILLER IN WOOD BASED COMPOSITES.
por: MATUANA, LAURENT M.

TEMPERATURE DEPENDENCE OF THE DIELECTRIC PROPERTIES OF RUBBER WOOD.
por: FIROZ KABIR, MOHAMMED

THE INFLUENCE OF WOOD SPECIMEN GEOMETRY ON MOISTURE MOVEMENT DURING DRYING.
por: BARONAS, ROMAS

Experimental equilibrium moisture content of wood under vacuum.
por: Yi, Song-Lin

Cartas.
por: Ortega Cruz, José Ramón

Long-term drying behavior, dimension, and weight changes due to moisture cycling in wood-polypropylene composites.
por: Cheng, Qingzheng

POTENTIAL SOURCES OF VARIATION THAT INFLUENCE THE FINAL MOISTURE CONTENT OF KILN-DRIED HARDWOOD LUMBER.
por: HONGMEI GU... [ET AL.]

APPLICATION OF THE ESEM TECHNIQUE IN WOOD RESEARCH.PART II. COMPARISON OF OPERATIONAL MODES.
por: TURKULIN, HRVOJE

Strategy to control the effectiveness of microwave treatment of wood in the framework of the implementation of ISPM 15.
por: Jean-Marc Henin ... [Et al.]

ABILITY OF NEAR INFRARED SPECTROSCOPY TO MONITOR AIR-DRY DENSITY DISTRIBUTION AND VARIATION OF WOOD..
por: VIA, BRIAN

Moisture absorption and dimensional stability of popular wood impregnated with sucrose and sodium chloride /
por: Petr, Pařil

Effects of panel density and mat moisture content on processing medium density fiberboard.
por: Cai, Zhiyong

VACCUM DRYING OF SMALL WOOD COMPONENTS AT ROOM TEMPERATURE; ZHANGJING CHEN, FRED M. LAMB.
por: CHEN, ZHAGJING

Analysis of three-year Wisconsin temperature histories for roof systems using wood, wood-thermoplastic composite, and fiberglass shingles.
por: Winandy, Jerrold E.

Basic effects of environment on the strength, scaling, and embrittlement of metals at high temperatures
Publicado: (1955)

Symposium on strength and ductility of metals at elevated temperatures : with particular reference to effects of notches and metallurgical changes.
Publicado: (1953)

Tiempo de rotura en fluencia y comportamiento a la fluencia lenta del acero X6 CrNi 1811 (1.4948), parte II del programa de extrapolacion /
por: Solano, R. R., et al.
Publicado: (1979)

Evaluation of rolling contacts in the rango of 550º to 1000ºF /
por: Murray, S. F., et al.

The influence of composition upon the 1500°F creep-rupture strength and microstructure of molybdenum-chromium-iron-nickel base alloys
por: Roche, Thomas Kirby, et al.

CONTINUOUS ULTRASONIC INSPECTION OF EXTRUDED WOOD PLASTIC COMPOSITES.
por: TUCKER, BRIAN J.

Compatibilizer selection to improve mechanical and moisture properties of extruded wood-HDPE composites.
por: Chowdhury, Mohammed Jahangir A.

Technical note : equilibrium moisture content of norway spruce at low pressure.
por: Chen, Zhangjing

Moisture sorption properties of hardwoods as affected by their extraneous substances, wood density, and interlocked grain.
por: Hernández, Roger E.

TH EEFFECT OS STEAMING AND MOISTURE CONTENT CHANGE ON THE RESONANCE FREQUENCY OF WOOD.
por: RICE, WILLIAM

Determination of internal moisture transport and surface emission coefficients for eastern white pin.
por: Yeo, Hwanmyeong