STRESS WAVE NONDESTRUCTIVE EVALUATION OF DOUGLAS-FIR PEELER CORES.

Código QR

STRESS WAVE NONDESTRUCTIVE EVALUATION OF DOUGLAS-FIR PEELER CORES.

Detalles Bibliográficos
Autor principal:	ROSS, ROBERT J.
Formato:	Artículo
Lenguaje:	Spanish
Materias:	MADERA DE CONSTRUCCION REGISTROS CHAPAS DE MADERA Artículos de revista

Ejemplares similares

ASSESSMENT OF INTENSIVE STRESS WAVE SCANNING OF DOUGLAS FIR TREES FOR PREDICTING LUMBER MOE.
por: WAGNER, FRANCIS G.

Extracting greater value from subalpine fir : veneer products.
por: Knudson, R.M.

GATE TO GATE LIFE CYCLE INVENTORY OF LAMINATED VENEER LUMBER PRODUCTION.
por: WILSON, JAMES B.

Evaluation of oriented strandboard and plywood subjected to severe relative humidity and temperature conditions.
por: Garay M., Rose Marie

Influence of several preparation conditions on Douglas-fir plywood gluebond quality test results.
por: DeVallance, D. B.

Douglas - fir plywood gluebond quality as influenced by veneer roughness, lathe checks, and annual ring characteristics.
por: DeVallance, D. B.

Carpintería. Teoría y práctica madera, herramientas, taller
por: España. Idea Books
Publicado: (1999)

NONDESTRUCTIVE EVALUATION OF STRENGTH PERFORMANCE FOR FINGER-JOINTED WOOD USING FLEXURAL VIBRATION TECHNIQUES.
por: BYEON, HEE-SEOP

STRUCTURAL TIMBERS FROM RETIRED DOUGLAS-FIR UTILITY POLES.
por: LEICHTI, ROBERT J.

On-site veneer production in short-rotation hybrid poplar plantations.
por: Spinelli, Raffaele

Drying rate correlation for Douglas - fir lumber.
por: Milota, Mike

EFFECT OF DRILLED HOLES ON THE BENDING STRENGTH OF LARGE DIMENSION DOUGLAS FIR LUMBER.
por: FALK, R.H.

Mechanical properties of Canadian coastal Douglas-fir and Hem-Fir.
por: Chen, Yue

Use of near infrared spectroscopy and multivariate analysis to predict wood density of Douglas-fir from chain saw chips.
por: Acuna, Mauricio A.

Effect of wood moisture content and rod dosage on boron or fluoride movement through Douglas-fir heartwood.
por: Cabrera, Yohanna

THE DURABILITY OF SERPENTINE-END-MATCHED JOINTS DURING VENEER SLICING.
por: LIU, YUQING

Nondestructive detection of termites using a millimeter - wave imaging technique.
por: Fujii, Yoshihisa

EFFECTS OF RADIAL FORCE AND TIP PATH OVERLAP ON THE RING DEBARKING EFFICIENCY OF FROZEN BALSAM FIR LOGS.
por: LAGANIERE

Do Douglas-fir branches and roots have juvenile wood?.
por: Peterson, Matthew G.

BENDING CREEP AND LOAD DURATION OF DOUGLAS-FIR 2 BY 4S UNDER CONSTANT LOAD FOR UP TO 12-PLUS YEARS.
por: GERHARDS, VHARLES C.

Grading and properties of small - diameter Douglas - fir and ponderosa pine tapered logs.
por: David W. Green ... [Et al.]

HAP AND VOC EMISSIONS FROM WHITE FIR LUMBER DRIED AT HIGH AND CONVENTIONAL TEMPERATURES.
por: MILOTA, MICHAEL R.

Nondestructive testing and evaluation of wood : a worldwide research update.
por: Brashaw, Brian K

NONDESTRUCTIVE EVALUATION OF STANDING TREES WITH A STRESS WAVE METHDO.
por: WANG, XIPING

Estimating relative log prices of Douglas - fir through a financial analysis of the effects of wood density on lumber recovery and pulp yield.
por: Acuna, Mauricio A.

TRANSVERSE PERMEABILITY OF OSB PART II MODELING THE EFFECTS OF DENSITY AND CORE FINES CONTENT.
por: FAKHRI, HAMID

Effect of moisture content and density on the mechanical properties of veneer-bamboo zephyr composites.
por: Roh, Jeang-Kwan

Developing a model system in vitro to understand tracheary element development in Douglas-fir (Pseudostuga mensziesii) /
por: Pillai, Karthik V.

The influence of short-term thermomechanical densification on the surface wettability of wood veneers /
por: Bekhta, Pavlo

Impacts of high-temperature and restraint on kiln-dried grand fir studs curve sawn from small-diameter logs.
por: Deutschlander, Heidi M.

Cold-Formed Steel Structures design analysis Construction /
por: Yu, Wei-Wen
Publicado: (1973)

Performance of antisapstain compounds on kiln-dried Douglas-firand hem-fir lumber subjected to rewetting.
por: Melencion, Neil

Various factors and propagation trends of stress waves in cross sections of Euphrates poplar /

Estimating breakeven prices for Douglas-fir veneer quality logs from stiffness graded stands using acoustic tools.
por: Amishev, Dzhamal

Análisis experimentales de algunas teorías supuestamente aplicables al secado de chapas de madera. /
por: González-Trejos, Guillermo
Publicado: (1970)

STRUCTURAL LUMBER FROM DENSE STANDS OF SMALL-DIAMETER DOUGLAS-FIR TREES.
por: GREEN, DAVID W.

In - forest assessment of veneer grade Douglas - fir logs based on acoustic measurement of wood stiffness.
por: Dzhamal Amishev y Glen E. Murphy

Predicting wood quality of green logs by resonance vibration and stress wave in plantation-grown populus Xeuramericana /

EFFECT OF GROWTH RING ORIENTATION AND PLACEMENT OF EARLYWOOD AND LATEWOOD ON MOE AND MOR OF VERY-SMALL CLEAR DOUGLAS- FIR BEAMS.
por: GROTTA, AMY.

SEVERAL EXAMINATIONS ON THE STATIC BENDING TEST METHODS OF WOOD USING TODOMATSU (JAPANESE FIR).
por: YOSHIHARA, HIROSHI