BENDING MOMENT CAPACITY OF RECTANGULAR MORTISE AND TENON FURNITURE JOINTS.

Código QR

BENDING MOMENT CAPACITY OF RECTANGULAR MORTISE AND TENON FURNITURE JOINTS.

Detalles Bibliográficos
Autor principal:	ERDIL, Y. Z.
Formato:	Artículo
Lenguaje:	Spanish
Materias:	PRODUCTOS DE MADERA ACER DE AZUCAR ADHESIVOS PRUEBAS ESTUDIO DE CASOS MADERA DE CONSTRUCCION INDUSTRIA MUEBLES MOBILIARIO ARBOLES MADERABLES NUEZ LIRIODENDRON TULIPIFERA ALAMO TULIPAN LONGITUD Artículos de revista

Ejemplares similares

EFFECT OF SHOULDERS ON BENDING MOMENT CAPACITY OF ROUND MORTISE AND TENON JOINTS.
por: ECKELMAN, CARL

USING A HOT WATER BATH AS AN ALTERNATIVE PHYTOSANITATION METHOD FOR WOOD PACKAGING MATERIAL.
por: SLAHOR, JEFFREY J.

WITHDRAWAL, SHEAR, AND BENDING MOMENT CAPACITIES OF ROUND MORTISE AND TENON TIMBER FRAMING JOINTS.
por: AKCAY, HUSEYIN

Exploratory study of the moment capacity and semirigid moment - rotation behavior of round mortise and tenon joints.
por: Eckelman, Carl

Design and testing of wall cabinet frames constructed with round mortise - and-tenon joints.
por: Tankut, Ali N.

Semi-rigid connection factors for small round mortise and tenon joints.
por: Haviarova, Eva

MOMENT CAPACITY OF TRADITIONAL AND ALTERNATIVE T-TYPE END-TO-SIDE-GRAIN FURNITURE JOINTS.
por: EFE, HASAN

Measuring the impact of wood species on consumer preferences for wooden furniture by means of the analytic hierarchy process.
por: Scholz, Soren W.

Exploratory study of the withdrawal resistance of round mortise and tenon joints with steel pipe cross pins.
por: Eckelman, C. A.

THE IMPACT OF ENVIRONMENTAL CERTIFICATION ON PREFERENCES FOR WOOD FURNITURE : A CONJOINT ANALYSIS APPROACH.
por: ANDERSON, ROY C.

Parallel-to-grain end-load capacity of round mortises in round and rectangular timbers.
por: Eckelman, C.A.

WITHDRAWAL AND BENDING PERFORMANCE OF DOWEL JOINTS IN FURNITURE GRADE PINE PLYWOOD.
por: JILEI ZHANG

MOMENT CAPACITY OF METAL-PLATE-CONNECTED JOINTS IN FURNITURE GRADE PINE PLYWOOD.
por: JILEI ZHANG

Hybrid poplar as a feedstock for wood-plastic composites.
por: Englund, Karl

BENDING FATIGUE LIFE OF TWO PIN DOWEL JOINTS IN FURNITURE GRADE PINE PLYWWOD.
por: ZHANG, JILEI

Moment capacity of oriented strandboard gusset-plate joints for upholstered furniture. Part 2 : fatigue load.
por: Wang, Xiadong

On-site veneer production in short-rotation hybrid poplar plantations.
por: Spinelli, Raffaele

Moment capacity of oriented strandboard gusset-plate joints for upholstered furniture. Part I : static load.
por: Wang, Xiaodong

SHEAR FORCE AND BENDING MOMENT CAPACITIES OF JOINTS CONSTRUCTED WITH GLUED CORNER BLOCKS.
por: KASAL, A.

Down-regulation of PoGT47C expression in poplar results in a reduced glucuronoxylan content and an increased wood digestibility by cellulase.
por: Chanhui, Lee

Effect of the number of screws and screw size on moment capacity of furniture corner joints in case construction.
por: Kasal, Ali

WITHDRAWAL AND BENDING STRENGTH OF DOWEL NUTS IN PLYWOOD AND ORIENTED STRANDBOARD.
por: YUSUF Z. ERDIL

DEVELOPMENT OF A NOVOLAK BASED HYDROXYMETHYLATED RESORCINOL COUPLING AGENT FOR WOOD ADHESIVES.
por: CHRISTIANSEN, ALFRED W.

SOY BASED ADHESIVES WITH 1,3 DICHLORO 2 PROPANOL AS A CURING AGENT.
por: ROGERS, JAMES

FRACTURE OF WOOD COMPOSITES AND WOOD ADHESIVE JOINTS A COMPARATIVE REVIEW.
por: CONRAD, MICHAEL P.C.

MODELING THE RELATIONSHIPS BETWEEN WOOD PROPERTIES AND QUALITY OF VENEER AND PLYWOOD OF CHINESE PLANTATION POPLARS.
por: BAO, FUCHENG

Bending fatigue life of metal-plate-connected joints in furniture-grade pine plywood.
por: Zhang, Jilei

FACE LATERAL AND WITHDRAWAL RESISTANCES OF STAPLE JOINTS IN FURNITURE-GRADE PINE PLYWOOD; JILEI ZHANG, MARK MAUPIN.
por: ZHANG, JILEI

Influence of edging practices on cutting yields of Alaska birch lumber.
por: David L. Nicholls ... [Et al.]

BENDING STRENGTH OF GUSSET-PLATE JOINTS CONSTRUCTED OF WOOD COMPOSITES.
por: JILEI ZHANG ; LYON, DUANE E. ; QUIN, FRANKLIN

MONITORING BOND STRENGTH DEVELOPMENT IN PARTICLEBOARD DURING PRESSING, USING ACOUSTO-ULTRASONICS.
por: CHEN, LIHENG

American Society for Testing and Materials ASTM Standars on wood; adhesives
Publicado: (1981)

Plasticization of mango and poplar wood Using vapour phase ammonia teatment
por: Saloni, Priya

Evaluación de la resistencia mecánica de la madera melina(Gmelina arborea) unida con uniones de dedo (finger joint).
por: González, Guillermo

WITHDRAWAL STRENGTH AND MOMENT RESISTANCE OF SCREWED T-TYPE END-TO-SIDE GRAIN FURNITURE JOINTS.
por: EFE, HASAN

RELATING TRADITIONAL SURFACE ROUGHNESS MEASURES TO GLUEBOND QUALITY IN PLYWOOD; J.L. NEESE ... [ET AL.].

Exploratory study of truss heel joints constructed with round mortise and tenon joints.
por: Eckelman, C.

Design and construction of school work tables for developing countries.
por: Yusuf Erdil, Carl Eckelman, Eva Haviarona

STRENGTH OF SMALL-DIAMETER ROUND AND TAPERED BENDING MEMBERS.
por: WOLFE, RON

EFFECT OF SPECIES, CUTTING DIRECTION, DIMENSIONS, AND TEMPERATURE ON FLAKE DRYING.
por: DEOMANO, EDGAR C.