VERTICAL DENSITY PROFILES IN THERMALLY COMPRESSED BALSAM FIR WOOD.

Código QR

VERTICAL DENSITY PROFILES IN THERMALLY COMPRESSED BALSAM FIR WOOD.

Detalles Bibliográficos
Autor principal:	JIEYING WANG
Formato:	Artículo
Lenguaje:	Spanish
Materias:	MADERAS PROPIEDADES TERMICAS TEMPERATURA DE LA MADERA HUMEDAD DE LA MADERA ABETO DE BALSAMO ABIES BALSAMEA TRANSMISION DE CALOR PRUEBAS ESTUDIO DE CASOS Artículos de revista

Ejemplares similares

LONGITUDINAL AND TRANSVERSE PERMEABILITY OF BALSAM FIR WETWOOD AND NORMAL HEART WOOD.
por: LIHRA, TORSTEN

EFFECTS OF RADIAL FORCE AND TIP PATH OVERLAP ON THE RING DEBARKING EFFICIENCY OF FROZEN BALSAM FIR LOGS.
por: LAGANIERE

Effect of wood moisture content and rod dosage on boron or fluoride movement through Douglas-fir heartwood.
por: Cabrera, Yohanna

Theoretical thermal conductivity equation for uniform density wood cell.
por: Hunt, J. F.

Moisture effects on in-situ vertical density profile monitoring during OSB hot - pressing.
por: Pablo J. Garcia , Siqun Wang, William W. Moschler

Extracting greater value from subalpine fir : veneer products.
por: Knudson, R.M.

HAP AND VOC EMISSIONS FROM WHITE FIR LUMBER DRIED AT HIGH AND CONVENTIONAL TEMPERATURES.
por: MILOTA, MICHAEL R.

FUNDAMENTALS OF VERTICAL DENSITY PROFILE FORMATION IN WOOD COMPOSITES : PART III. MDF DENSITY FORMATION DURING HOT PRESSING.
por: WANG, SIQUN

Study on preparation and properties of phenol-formaldehyde-chinese fir liquefaction copolymer resin /

Elastic properties of compressed spruce with respect to its cross section obtained under various compression ratios.
por: Yoshihara, Hiroshi

ASSESSMENT OF INTENSIVE STRESS WAVE SCANNING OF DOUGLAS FIR TREES FOR PREDICTING LUMBER MOE.
por: WAGNER, FRANCIS G.

FUNDAMENTALS OF VERTICAL DENSITY PROFILE FORMATION IN WOOD COMPOSITES. PART II. METHODOLOGY OF VERTICAL DENSITY FORMATION UNDER DYNAMIC CONDITIONS.
por: WANG, SIQUN

EFFECT OF GROWTH RING ORIENTATION AND PLACEMENT OF EARLYWOOD AND LATEWOOD ON MOE AND MOR OF VERY-SMALL CLEAR DOUGLAS- FIR BEAMS.
por: GROTTA, AMY.

Extracting greater value from subalpine fir : profiled decking.
por: McFarling, S.M.

THE INFLUENCE OF FURNISH MOISTURE CONTENT AND PRESS CLOSURE RATE ON THE FORMATION OF THE VERTICAL DENSITY PROFILE IN ORIENTED STRANDBOARD.
por: ANDREWS, CHRIS K. ; WINISTORFER, PAUL M. ; BENNETT, RICHARD M.

Models for predicting lumber grade yield using tree characteristics in black spruce.
por: Liu, Chuangmin

Validating the Patterson and Doruska equation for estimating the volume of hardwood butt logs.
por: Patterson, David W.

Mechanical properties of Canadian coastal Douglas-fir and Hem-Fir.
por: Chen, Yue

Two dimensional finite element heat transfer model of softwood. Part I. Effective thermal conductivity.
por: Hunt, John F.

A mechanical evaluation of Alaska-grown Sitka spruce.
por: Bannister, John

Measuring and simulating the effects of the pressing schedule on the density profile development in wood-based composites.
por: Thoemen, Heiko

Two dimensional finite element heat transfer model of softwood. Part II. Macrostructural effects.
por: Gu, Hongmei

BENDING CREEP BEHAVIOR OF MEDIUM DENSITY FIBERBOARD AND PARTICLEBOARD DURING CYCLIC MOISTURE CHANGES ; MASAMI FUSHITANI ; D. PASCAL KAMDEM.
por: ZHOU, YAGUANG

Estimating breakeven prices for Douglas-fir veneer quality logs from stiffness graded stands using acoustic tools.
por: Amishev, Dzhamal

Use of near infrared spectroscopy and multivariate analysis to predict wood density of Douglas-fir from chain saw chips.
por: Acuna, Mauricio A.

EFFECT OF MOISTURE CONTENT AND TEMPERATURE ON TENSION STRENGTH OF FINGERJOINTED BLACK SPRUCE LUMBER.
por: ST-PIERRE, BENOIT

Chemical characterization amd ftir spectroscopy of thermally compressed eucalyptus wood panels /
por: Gonultas, Oktay

Thermal degradation and thermal conductivity of gypsum-cement particleboard.
por: Espinoza-Herrera, Raúl

Two-dimensional finite element heat transfer model of softwood. Part III : Effect of moisture content on thermal conductivity.
por: Gu, Hongmei

Influence of several preparation conditions on Douglas-fir plywood gluebond quality test results.
por: DeVallance, D. B.

Moisture sorption properties of hardwoods as affected by their extraneous substances, wood density, and interlocked grain.
por: Hernández, Roger E.

Modeling lumber value recovery in relation to selected tree characteristics in black spruce using the Optitek sawing simulator.
por: Liu, Chuangmin

Angle to the grain embedding strength concerning dowel type fasteners.
por: Bleron, L.

Improving the sanding process of black spruce wood for surface quality and water-based coating adhesion /
por: Cool, Julie

Grade yield of lumber in Norway spruce (Picea abies (L.) Karst.) as affected by forest quality, tree size, and log length.
por: Ovrum, Audun

Long-term performance of engineered wood flooring when exposed to temperature and humidity cycling.
por: Blanchet, Pierre

ACOUSTIC CONSTANT PROPERTY OF INTERIOR SPRUCE (PICEA SPP.) FROM THE CENTRAL INTERIOR OF BRITISH COLUMBIA.
por: PARFITT, LIAM J.

Estimating relative log prices of Douglas - fir through a financial analysis of the effects of wood density on lumber recovery and pulp yield.
por: Acuna, Mauricio A.

STRESS WAVE NONDESTRUCTIVE EVALUATION OF DOUGLAS-FIR PEELER CORES.
por: ROSS, ROBERT J.

FUNDAMENTALS OF VERTICAL DENSITY PROFILE FORMATION IN WOOD COMPOSITES. PART1. IN-SITUDENSITY MEASUREMENT OF THE CONSOLIDATION PROCESS.
por: WINISTORFER, PAUL