WITHDRAWAL AND BENDING PERFORMANCE OF DOWEL JOINTS IN FURNITURE GRADE PINE PLYWOOD.

Código QR

WITHDRAWAL AND BENDING PERFORMANCE OF DOWEL JOINTS IN FURNITURE GRADE PINE PLYWOOD.

Detalles Bibliográficos
Autor principal:	JILEI ZHANG
Formato:	Artículo
Lenguaje:	Spanish
Materias:	MADERAS ANATOMIA DE LA MADERA FLEXION ARBOLES MADERABLES PINO Artículos de revista

Ejemplares similares

BENDING FATIGUE LIFE OF TWO PIN DOWEL JOINTS IN FURNITURE GRADE PINE PLYWWOD.
por: ZHANG, JILEI

Bending fatigue life of metal-plate-connected joints in furniture-grade pine plywood.
por: Zhang, Jilei

WITHDRAWAL AND BENDING STRENGTH OF DOWEL NUTS IN PLYWOOD AND ORIENTED STRANDBOARD.
por: YUSUF Z. ERDIL

MOMENT CAPACITY OF METAL-PLATE-CONNECTED JOINTS IN FURNITURE GRADE PINE PLYWOOD.
por: JILEI ZHANG

FACE LATERAL AND WITHDRAWAL RESISTANCES OF STAPLE JOINTS IN FURNITURE-GRADE PINE PLYWOOD; JILEI ZHANG, MARK MAUPIN.
por: ZHANG, JILEI

SHEAR FORCE AND BENDING MOMENT CAPACITIES OF JOINTS CONSTRUCTED WITH GLUED CORNER BLOCKS.
por: KASAL, A.

CHECKING OF CCA TREATED RADIATA PINE DECKING TIMBER EXPOSED TO NATURAL WEATHERING.
por: EVANS, PHILIP D.

EDGEWISE FLEXURAL PROPERTIES AND MODULUS OF RIGIDITY OF DIFFERENT SIZES OF SOUTHERN PINE LVL AND PLYWOOD.
por: BIBLIS, EVANGELOS J.

HEARTWOOD AND EXTRACTIVE CONTENT OF SCOTS PINE IN SOUTHERN FINLAND MODELS TO APPLY AT HARVEST.
por: UUSITALO, JORI

Elastic constants evaluated from plate tests compared to previous bending tests.
por: Young Jeong, Gi

SEVERAL EXAMINATIONS ON THE STATIC BENDING TEST METHODS OF WOOD USING TODOMATSU (JAPANESE FIR).
por: YOSHIHARA, HIROSHI

BENDING MOMENT CAPACITY OF RECTANGULAR MORTISE AND TENON FURNITURE JOINTS.
por: ERDIL, Y. Z.

EFFECT OF SHEAR DEFLECTION ON BENDING PROPERTIES OF COMPRESSED WOOD.
por: KUBOJIMA, YOSHITAKA

Increasing value recovery of mountain pine beetle ( MPB) - attacked lodgepole pine logs for specialty plywood products.
por: Jianhe Wang, Brad

RELATIONSHIP BETWEEN SITE INDEX AND SOME PHYSICAL PROPERTIES OF CALABRIAN PINE.
por: GUNDOGAN, RECEP

BENDING FATIGUE LIFE OF TWO-PIN DOWEL JOINTS CONSTRUCTED OF WOOD AND WOOD COMPOSITES; JILEI ZHANG, FRANKLIN QUIN, BOB TACKETT.
por: ZHANG, JILEI

The Pine tree book : based on the Arthur Ross Pinetum in Central Park
por: Peterson, rusell
Publicado: (1980)

Estimating local modulus of elasticity in a beam from bending measurements : an overview.
por: Bechtel, Friend K.

FATIGUE PERFORMANCE OF WOOD-BASED COMPOSITES AS UPHOLSTERED FURNITURE FRAME STOCK.
por: ZHANG, JILEI

MECHANICAL CHARACTERIZATION OF TIMBER ACCORDING TO EUROPEAN STANDARDS FROM SPANISH PROVENANCES OF SCOTS PINE.
por: HERMOSO PRIETO, E.

BENDING STRENGTH OF GUSSET-PLATE JOINTS CONSTRUCTED OF WOOD COMPOSITES.
por: JILEI ZHANG ; LYON, DUANE E. ; QUIN, FRANKLIN

THE THERMAL CONDUCTIVITY OF PLANTATION GROWN WHITE PINE (PINUS STROBUS) AND RED PINE (PINUS RESINOSA) AT TWO MOISTURE CONTENT LEVELS; R.W. RICE, ROBERT SHEPARD.
por: RICE, R.W.

PROPORTIONAL SURFACE DRYING OF SMALL LOBLOLLY PINE CUBES AT 120°C.
por: SHMULSKY, RUBIN

EFFECT OF COMPRESSION WOOD ON LEACHING AND FIXATION OF CCA-C TREATED RED PINE.
por: KARTAL, S. NAMI

Lateral edge resistance of single-fastener furniture joints in wood-based panel products.
por: Zhang, Jilei

LOAD WITHDRAWAL DISPLACEMENT CHARACTERISTICS OF STAPLES IN SELECTED HARDWOODS.
por: JILEI ZHANG

THE EFFECT OF EXCHANGE RATES ON SOUTHERN PINE EXPORTS.
por: WISDOM, H.W.

THE EFFECT OF MOISTURE CONTENT AND BENDING RATE ON THE WORK REQUIRED TO BEND SOLID RED OAK.
por: ROCE, R.W.

MICROORGANISMOS FRECUENTEMENTE HALLADOS EN AL MADERA DE PINO CARIBE BAJO RIEGO POR ASPERSION EN PATIOS DE ROLAS ; ENCINAS, OSVALDO ... [ET AL.].

Bending creep of small samples from parallel strand lumber.
por: Lee, Andy W.C.

Effect of press-drying on static bending properties of plantation-grown No. 2 loblolly pine lumber.
por: Stoker, Denise L.

MOISTURE CONTENT OF STRUCTURAL FINGER-JOINTED SOUTHERN PINE FOLLOWING A DURABILITY CYCLE.
por: DOUGAL, EDWARD F.

Evaluating the heating value of fire-killed ponderosa pine trees in Colorado.
por: Mackes, Kurt

WITHDRAWAL, SHEAR, AND BENDING MOMENT CAPACITIES OF ROUND MORTISE AND TENON TIMBER FRAMING JOINTS.
por: AKCAY, HUSEYIN

INFLUENCE OF SITE ON SAPWOOD AND HEARTWOOD RATIOS OF TURKISH CALABRIAN PINE.
por: BEKTAS, IBRAHIM

BENDING CREEP BEHAVIOR OF MEDIUM DENSITY FIBERBOARD AND PARTICLEBOARD DURING CYCLIC MOISTURE CHANGES ; MASAMI FUSHITANI ; D. PASCAL KAMDEM.
por: ZHOU, YAGUANG

Improvement of prediction accuracy of glulam modulus of elasticity by considering neutral axis shift in bending.
por: Shim, Kug-Bo

Influence of several preparation conditions on Douglas-fir plywood gluebond quality test results.
por: DeVallance, D. B.

Estudio preliminar de dos maderas típicas de Guatemala : "Pablo Valor" y "Chichipate" /
por: Ramírez B., Manuel Enrique, et al.
Publicado: (1959)

Anatomía de la madera de cinco especies de encinos de Durango /
por: Pérez Olvera, Carmen de la Paz, et al.
Publicado: (1982)