SEVERAL EXAMINATIONS ON THE STATIC BENDING TEST METHODS OF WOOD USING TODOMATSU (JAPANESE FIR).

Código QR

SEVERAL EXAMINATIONS ON THE STATIC BENDING TEST METHODS OF WOOD USING TODOMATSU (JAPANESE FIR).

Detalles Bibliográficos
Autor principal:	YOSHIHARA, HIROSHI
Formato:	Artículo
Lenguaje:	Spanish
Materias:	MADERAS FLEXION Artículos de revista

Ejemplares similares

EFFECT OF SHEAR DEFLECTION ON BENDING PROPERTIES OF COMPRESSED WOOD.
por: KUBOJIMA, YOSHITAKA

EXAMINATION OF COMPRESSION TESTING METHODS FOR WOOD IN THE PARALLEL TO THE GRAIN DIRECTION.
por: YOSHIHARA, HIROSHI

Elastic constants evaluated from plate tests compared to previous bending tests.
por: Young Jeong, Gi

EXAMINATION OF THE OFF AXIS TENSION TEST METHOD FOR EVALUATING THE SHEAR PROPERTIES OF WOOD.
por: YOSHIHARA, HIROSHI

Examination of the specimen configuration and analysis method in the flexural and longitudinal vibration tests of solid wood and wood-based materials /
por: Yoshihara, Hiroshi

BENDING FATIGUE LIFE OF TWO PIN DOWEL JOINTS IN FURNITURE GRADE PINE PLYWWOD.
por: ZHANG, JILEI

Estimating local modulus of elasticity in a beam from bending measurements : an overview.
por: Bechtel, Friend K.

WITHDRAWAL AND BENDING STRENGTH OF DOWEL NUTS IN PLYWOOD AND ORIENTED STRANDBOARD.
por: YUSUF Z. ERDIL

Bending creep of small samples from parallel strand lumber.
por: Lee, Andy W.C.

Mechanical properties of Canadian coastal Douglas-fir and Hem-Fir.
por: Chen, Yue

Improvement of prediction accuracy of glulam modulus of elasticity by considering neutral axis shift in bending.
por: Shim, Kug-Bo

WITHDRAWAL AND BENDING PERFORMANCE OF DOWEL JOINTS IN FURNITURE GRADE PINE PLYWOOD.
por: JILEI ZHANG

Influence of several preparation conditions on Douglas-fir plywood gluebond quality test results.
por: DeVallance, D. B.

BENDING CREEP BEHAVIOR OF MEDIUM DENSITY FIBERBOARD AND PARTICLEBOARD DURING CYCLIC MOISTURE CHANGES ; MASAMI FUSHITANI ; D. PASCAL KAMDEM.
por: ZHOU, YAGUANG

Technical note : a preliminary study on the bending stiffness of chemically treated wood material for structural composite lumber.
por: McConnell, T. Eric

EFFECT OF GROWTH RING ORIENTATION AND PLACEMENT OF EARLYWOOD AND LATEWOOD ON MOE AND MOR OF VERY-SMALL CLEAR DOUGLAS- FIR BEAMS.
por: GROTTA, AMY.

COMPARISONS OF SHEAR STRESS/SHEAR STRAIN RELATIONS OF WOOD OBTAINED BY IOSIPESCU AND TORSION TESTS.
por: YOSHIHARA, HIROSHI

A new measure of strand alignment with respect to bending stiffness.
por: Siguo Chen ... [Et al.]

Comparison of the mechanical properties of branch and stem wood for three specie.
por: Gurau, Lidia

Mode II fracture behavior of bonded viscoelastic thermal compressed wood.
por: Kutnar, Andreja

SHEAR FORCE AND BENDING MOMENT CAPACITIES OF JOINTS CONSTRUCTED WITH GLUED CORNER BLOCKS.
por: KASAL, A.

Post-fire assessments, methodology, and equations for directly determining wood's residual flexural properties.
por: Kukay, Brian

Bending solid wood to form /
por: Peck, Edward Coit n. 1894, et al.
Publicado: (1957)

EFFECT OF DRILLED HOLES ON THE BENDING STRENGTH OF LARGE DIMENSION DOUGLAS FIR LUMBER.
por: FALK, R.H.

EVALUATION OF A REDUCED SECTION MODULUS MODEL FOR DETERMINING EFFECTS OF INCISING ON BENDING STRENGTH AND STIFFNESS OF STRUCTURAL LUMBER.
por: HERNANDEZ, ROLAND

Relationship between bending and tensile stress distribution in veneer plywood.
por: Kljak, Jaroslav

Predicting performance of oriented strand-board under concentrated static loading conditions using finite element modeling.
por: Chen, Zheng

Modeling wood strands as multi-layer composites : bending and tension loads.
por: Hindman, Daniel P.

Strength properties of juvenile and mature wood in black locust (Robinia Pseudoacacia L.).
por: Adamopoulos, Stergios

SELECTED QUALITY CHARACTERISTICS OF WHITE ASH USED IN PROFESSIONAL BASEBALL BATS.
por: BLANKENHORN, PAUL R.

Estimating local compliance in a beam from bending measurements. Part II : Optimal estimation of local compliance.
por: Bechtel, Friend K.

Feasibility of using saltcedar as a filler in injection-molded polyethylene composites.
por: Clemons, Craig M.

THE USE OF ENGINEERED WOOD PRODUCTS IN TRADITIONAL JAPANESE WOOD HOUSE CONSTRUCTION.
por: COHEN, DAVID

Polypropylene composites filled with steam-exploded wood fibers from beetle-killed loblolly Pine by compression-molding.
por: Yin, Suzhou

BENDING STRENGTH OF GUSSET-PLATE JOINTS CONSTRUCTED OF WOOD COMPOSITES.
por: JILEI ZHANG ; LYON, DUANE E. ; QUIN, FRANKLIN

BENDING CREEP AND LOAD DURATION OF DOUGLAS-FIR 2 BY 4S UNDER CONSTANT LOAD FOR UP TO 12-PLUS YEARS.
por: GERHARDS, VHARLES C.

Use of near infrared spectroscopy and multivariate analysis to predict wood density of Douglas-fir from chain saw chips.
por: Acuna, Mauricio A.

Effect of press-drying on static bending properties of plantation-grown No. 2 loblolly pine lumber.
por: Stoker, Denise L.

Elastic modulus determination of transgenic aspen using a dynamic mechanical analyzer in static bending mode /

VARIACION DEL MODULO DE RUPTURA EN CINCO ESPECIES MADERABLES.
por: HOYLE, ROBERT

Cannot write session to /tmp/vufind_sessions/sess_l562n05skcr687gtcftkedv1lc