THE EFFECT OF MOISTURE CONTENT AND BENDING RATE ON THE WORK REQUIRED TO BEND SOLID RED OAK.

Código QR

THE EFFECT OF MOISTURE CONTENT AND BENDING RATE ON THE WORK REQUIRED TO BEND SOLID RED OAK.

Detalles Bibliográficos
Autor principal:	ROCE, R.W.
Formato:	Artículo
Lenguaje:	Spanish
Materias:	MADERAS HUMEDAD DE LA MADERA HUMEDAD FLEXON ARBOLES MADERABLES ROBLE ROJO QUERCUS RUBRA Artículos de revista

Ejemplares similares

Determination of moisture content and density of fresh-sawn red oak lumber by near infrared spectroscopy.
por: Defo, Maurice

BENDING CREEP BEHAVIOR OF MEDIUM DENSITY FIBERBOARD AND PARTICLEBOARD DURING CYCLIC MOISTURE CHANGES ; MASAMI FUSHITANI ; D. PASCAL KAMDEM.
por: ZHOU, YAGUANG

Bending creep of small samples from parallel strand lumber.
por: Lee, Andy W.C.

Experimental equilibrium moisture content of wood under vacuum.
por: Yi, Song-Lin

UNSOUND DEFECT VOLUME IN HARDWOOD PALLET CANTS.
por: ARAMAN, PHILIP A.

TH EEFFECT OS STEAMING AND MOISTURE CONTENT CHANGE ON THE RESONANCE FREQUENCY OF WOOD.
por: RICE, WILLIAM

Effect of wood moisture content and rod dosage on boron or fluoride movement through Douglas-fir heartwood.
por: Cabrera, Yohanna

Bending solid wood to form /
por: Peck, Edward Coit n. 1894, et al.
Publicado: (1957)

PRELIMINARY EVALUATION OF VACUUM TO CONTROL WOOD-BORING INSECTS IN RAW WOOD PACKAGING MATERIALS.
por: CHEN, ZHANGJING

FORECASTING HARDWOOD STUMPAGE PRICE TRENDS IN PENNSYLVANIA.
por: LINEHAN, PETER E.

Efecto de la temperatura y del flujo de aire sobre el proceso de secado de madera de encino (Quercus Candicans Neé) pret
por: Sandoval, S.

EFFECT OF SAMPLE GEOMETRY ON EMC AND MOISTURE HYSTERESIS OF RED OAK ; KOSASI KADIR ; ROBERT ERICKSON.
por: SHMULSKY, RUBIN

MOISTURE CONTENT OF STRUCTURAL FINGER-JOINTED SOUTHERN PINE FOLLOWING A DURABILITY CYCLE.
por: DOUGAL, EDWARD F.

POTENTIAL SOURCES OF VARIATION THAT INFLUENCE THE FINAL MOISTURE CONTENT OF KILN-DRIED HARDWOOD LUMBER.
por: HONGMEI GU... [ET AL.]

Influence of moisture content on longitudinal, radial, and tangential ultrasonic velocity for two Brazilian wood specie.
por: Gonçalves, Raquel

Microwave moisture measurement system for lumber drying.
por: Moschler, William W.

WITHDRAWAL AND BENDING PERFORMANCE OF DOWEL JOINTS IN FURNITURE GRADE PINE PLYWOOD.
por: JILEI ZHANG

THE EFFECT OF STEAMING ON EQUILIBRIUM MOISTURE CONTENT IN BEECH WOOD (FAGUS ORIENTALIS LIPSKY); ONER UNSAL, NADIR AYRILMIS.
por: UNSAL, ONER

Technical note : equilibrium moisture content of norway spruce at low pressure.
por: Chen, Zhangjing

CONTROLLING MOISTURE CONTENT OF WOOD SAMPLES USING A MODIFIED SOIL-PAN DECAY METHOD.
por: WINANDY, JERROLD E.

Prefinished oak flooring surface checking and physical properties.
por: Blanchet, Pierre

Effect of moisture content variation on CT image classification to identify internal defects of sugar maple logs.
por: Rojas, Gerson

Moisture meter correction factors for yellow poplar bark.
por: Muehlbacher, Josef

SENSIBLE HEATING APPROACH TO CONTROLLING THE EQUILIBRIUM MOISTURE CONTENT OF WOOD.
por: PERALTA, PERRY

Effect of moisture content and density on the mechanical properties of veneer-bamboo zephyr composites.
por: Roh, Jeang-Kwan

Compatibilizer selection to improve mechanical and moisture properties of extruded wood-HDPE composites.
por: Chowdhury, Mohammed Jahangir A.

MOMENT CAPACITY OF TRADITIONAL AND ALTERNATIVE T-TYPE END-TO-SIDE-GRAIN FURNITURE JOINTS.
por: EFE, HASAN

Identification of the relationship between equilibrium moisture content, dry bulb temperature, and relative humidity using regression analysis.
por: Ray, Charles D.

EFFECT OF HARDWOOD VESSELS ON LONGITUDINAL MOISTURE DIFFUSION.
por: CHOONG, ELVIN T.

EFFECT OF MOISTURE CONTENT AND TEMPERATURE ON TENSION STRENGTH OF FINGERJOINTED BLACK SPRUCE LUMBER.
por: ST-PIERRE, BENOIT

Measurement of dynamic sorption behaviour of small specimens of pinus radiata - influence of wood type and moisture content on diffusion rate /
por: Sargent, R.

Transverse mechanical behavior of wood under high temperature and pressurized steam.
por: Wanli Cheng ... [Et al.]

Moisture sorption properties of hardwoods as affected by their extraneous substances, wood density, and interlocked grain.
por: Hernández, Roger E.

Moisture effects on in-situ vertical density profile monitoring during OSB hot - pressing.
por: Pablo J. Garcia , Siqun Wang, William W. Moschler

STRENGTH OF SMALL-DIAMETER ROUND AND TAPERED BENDING MEMBERS.
por: WOLFE, RON

FE ANALYSIS OF CREEP AND HYGROEXPANSION RESPONSE OF CORRUGATED FIBERBOARAD TO A MOISTURE FLOW A TRANSIENT NONLINEAR ANALYSIS.
por: RAHMAN, ADEEB

Defectos comunes encontrados en las piezas aserradas y cepilladas de melina : cuarta parte /
por: González Trejos, Guillermo

SHEAR FORCE AND BENDING MOMENT CAPACITIES OF JOINTS CONSTRUCTED WITH GLUED CORNER BLOCKS.
por: KASAL, A.

Estimacion del punto de saturacion de la fibra (PSF) de las maderas
por: Fuentes S, M.

Moisture in untreated, acetylated and furfurylated Norway spruce studied during drying using time domain NMR.
por: Thygesen, Lisbeth G.