NONDESTRUCTIVE EVALUATION OF STRENGTH PERFORMANCE FOR FINGER-JOINTED WOOD USING FLEXURAL VIBRATION TECHNIQUES.

Código QR

NONDESTRUCTIVE EVALUATION OF STRENGTH PERFORMANCE FOR FINGER-JOINTED WOOD USING FLEXURAL VIBRATION TECHNIQUES.

Detalles Bibliográficos
Autor principal:	BYEON, HEE-SEOP
Formato:	Artículo
Lenguaje:	Spanish
Materias:	MADERAS ELASTICIDAD RESISTENCIA DE LOS MATERIALES PINO ROJO PINUS RESINOSA PRODUCTOS DE MADERA QUIMICA DE LA MADERA PRUEBAS ESTUDIO DE CASOS MADERA DE CONSTRUCCION Artículos de revista

Ejemplares similares

Flexural properties of small, clear wood specimens obtained from two 20-year-old loblolly pine plantations planted at 6- by 6-foot and 12- by 12-foot spacings.
por: Biblis, E.

FIXATION AND LEACHING CHARACTERISTICS OF ACID COPPER CHROMATE (ACC) COMPARED TO OTHER CHROMIUM-BASED WOOD PRESERVATIVES.
por: GUO, AILONG

NEAR INFRARED SPECTROSCOPY FOR THE NONDESTRUCTIVE ESTIMATION OF CLEAR WOOD PROPERTIES OF PINUS TAEDA L. FROM THE SOUTHERN UNITED STATES.
por: SCHIMLECK, LAURENCE R.

KINETIC MODEL OF CCA FIXATION IN WOOD. PART II. THE MAIN REACTION ZONE.
por: KAZI, FEROZ K. M.

Strength of Appalachian hardwoods finger - jointed at elevated moisture content.
por: Lang, Elemer M.

EDGEWISE FLEXURAL PROPERTIES AND MODULUS OF RIGIDITY OF DIFFERENT SIZES OF SOUTHERN PINE LVL AND PLYWOOD.
por: BIBLIS, EVANGELOS J.

EFFICACY OF COMMERCIAL MICROWAVE EQUIPMENT FOR ERADICATION OF PINE WOOD NEMATODES AND CERAMBYCID LARVAE INFESTING RED PINE.
por: FLEMING, MARY R.

MOISTURE CONTENT OF STRUCTURAL FINGER-JOINTED SOUTHERN PINE FOLLOWING A DURABILITY CYCLE.
por: DOUGAL, EDWARD F.

STRUCTURAL PERFORMANCE OF FINGER JOINTED BLACK SPRUCE LUMBER WITH DIFFERENT JOINT CONFIGURATIONS.
por: BUSTOS, CECILIA

Influence of surface roughness and species on bond strength between the wood and the finish.
por: Ozdemir, Turgay

Influence of machining parameters on the tensile strength of finger- jointed sugar Maple lumber.
por: Dagenais, Christian

Predicting wood quality of green logs by resonance vibration and stress wave in plantation-grown populus Xeuramericana /

EFFECT OF COMPRESSION WOOD ON LEACHING AND FIXATION OF CCA-C TREATED RED PINE.
por: KARTAL, S. NAMI

INFLUENCE OF FASTENER SIZE ON LATERAL STRENGTH OF STEEL-TO-WOOD SCREW JOINTS.
por: CHUI, YING HEI

BENDING STRENGTH OF GUSSET-PLATE JOINTS CONSTRUCTED OF WOOD COMPOSITES.
por: JILEI ZHANG ; LYON, DUANE E. ; QUIN, FRANKLIN

FLEXURAL PROPERTIES, INTERNAL BOND STRENGTH, AND DIMENSIONAL STABILITY OF MEDIUM DENSITY FIBERBOARD PANELS MADE FROM HYBRID POPLAR CLONES.
por: JUN, LI SHI

WITHDRAWAL AND BENDING PERFORMANCE OF DOWEL JOINTS IN FURNITURE GRADE PINE PLYWOOD.
por: JILEI ZHANG

EVALUATING THE BENDING PROPERTIES OF CLEAR WOOD SPECIMENS PRODUCED FROM SMALL-DIAMETER PONDEROSA PINE TREES.
por: MACKES, KURT

DETERMINATION OF BORON DIFFUSION COEFFICIENTS IN WOOD.
por: RA, JONG B.

THE DURABILITY OF SERPENTINE-END-MATCHED JOINTS DURING VENEER SLICING.
por: LIU, YUQING

MECHANICAL PROPERTIES IN RELATION TO SELECTED WOOD CHARACTERISTICS OF BLACK SPRUCE.
por: ALTEYRAC, JEROME

Development of a new engineered wood product for structural applications made from trembling aspen and paper birch.
por: Beck, Katherina

Influencia del ángulo del grano sobre el módulo estático en Pinus radiata D. Don. /
por: Solórzano Naranjo, Stephie

SAWING SIMULATION OF MARITIME PINE (PINUS PINASTER AIT.) STEMS FOR PRODUCTION OF HEARTWOOD-CONTAINING COMPONENTS.
por: PINTO, ISABEL

EFFECT OF LOW RELATIVE HUMIDITY ON PROPERTIES OF STRUCTURAL LUMBER PRODUCTS.
por: GREEN, DAVID W.

Predicting the strength of Norway Spruce by microwave scanning : a comparison with other scanning techniques.
por: Lundgren, Nils

Estimating local modulus of elasticity in a beam from bending measurements : an overview.
por: Bechtel, Friend K.

Examination of the specimen configuration and analysis method in the flexural and longitudinal vibration tests of solid wood and wood-based materials /
por: Yoshihara, Hiroshi

CHARACTERIZING DISTRIBUTION OF GREEN VENEER MOISTURE CONTENT.
por: JIANHE WANG, BRAD

EFFECTS OF CURING TIME AND END PRESSURE ON THE TENSILE STRENGTH OF FINGER JOINED BLACK SPRUCE LUMBER.
por: BUSTOS, CECILIA

MOMENT CAPACITY OF METAL-PLATE-CONNECTED JOINTS IN FURNITURE GRADE PINE PLYWOOD.
por: JILEI ZHANG

EFFECT OF LOAD RATE ON FLEXURAL PROPERTIES OF WOOD PLASTIC COMPOSITES.
por: BRANDT, CHRISTOPHER W.

MICROFIBRIL ANGLE VARIATION IN RED PINE (PINUS RESINOSA AIT.) AND ITS RELATION TO THE STREGTH AND STIFFNESS OF EARLY JUVENILE WOOD.
por: DERESSE, TAKELE

EFFECTS OF COMPONENT RATIO OF THE FACE AND CORE LAMINAE ON STATIC BENDING STRENGTH PERFORMANCE OF TREE-PLY CROSS-LAMINATED WOOD PANELS MADE WITH SUGI CRYPTOMETRIA JAPONICA.
por: PARK, HAN-MIN

PROPORTIONAL SURFACE DRYING OF SMALL LOBLOLLY PINE CUBES AT 120°C.
por: SHMULSKY, RUBIN

INFLUENCE OF SITE ON SAPWOOD AND HEARTWOOD RATIOS OF TURKISH CALABRIAN PINE.
por: BEKTAS, IBRAHIM

Variaciones de las dimensiones de las traqueidas en madera de Pinus caribaeaMorelet var. hondurencis BARR.ET.GOLF., proveniente de tres plantaciones en la República de Panamá
por: Hidalgo González, Enibeth Irasema
Publicado: (1998)

Early detection and progression of decay in L-joints and lap-joints in a moderate decay hazard zone.
por: Clausen, Carol A.

WARP REDUCTION OF SYP LUMBER BY RESTRAINED DRYING.
por: SHMULSKY, RUBIN

STRESS WAVE NONDESTRUCTIVE EVALUATION OF DOUGLAS-FIR PEELER CORES.
por: ROSS, ROBERT J.

Cannot write session to /tmp/vufind_sessions/sess_91ej0g03vombagcvmau63h09jk