THE DURABILITY OF SERPENTINE-END-MATCHED JOINTS DURING VENEER SLICING.

Código QR

THE DURABILITY OF SERPENTINE-END-MATCHED JOINTS DURING VENEER SLICING.

Detalles Bibliográficos
Autor principal:	LIU, YUQING
Formato:	Artículo
Lenguaje:	Spanish
Materias:	PRODUCTOS DE MADERA MADERA DE CONSTRUCCION INDUSTRIAS DE LA MADERA MATERIALES DE CONSTRUCCION CHAPA PRUEBAS PINUS PANELES DE MADERA PINO AMERILLO OCCIDENTAL Artículos de revista

Ejemplares similares

GATE TO GATE LIFE CYCLE INVENTORY OF LAMINATED VENEER LUMBER PRODUCTION.
por: WILSON, JAMES B.

STRESS WAVE NONDESTRUCTIVE EVALUATION OF DOUGLAS-FIR PEELER CORES.
por: ROSS, ROBERT J.

CHARACTERIZING DISTRIBUTION OF GREEN VENEER MOISTURE CONTENT.
por: JIANHE WANG, BRAD

Extracting greater value from subalpine fir : veneer products.
por: Knudson, R.M.

MOMENT CAPACITY OF TRADITIONAL AND ALTERNATIVE T-TYPE END-TO-SIDE-GRAIN FURNITURE JOINTS.
por: EFE, HASAN

On-site veneer production in short-rotation hybrid poplar plantations.
por: Spinelli, Raffaele

INFLUENCE OF SITE ON SAPWOOD AND HEARTWOOD RATIOS OF TURKISH CALABRIAN PINE.
por: BEKTAS, IBRAHIM

MOISTURE CONTENT OF STRUCTURAL FINGER-JOINTED SOUTHERN PINE FOLLOWING A DURABILITY CYCLE.
por: DOUGAL, EDWARD F.

MOMENT CAPACITY OF METAL-PLATE-CONNECTED JOINTS IN FURNITURE GRADE PINE PLYWOOD.
por: JILEI ZHANG

NONDESTRUCTIVE EVALUATION OF STRENGTH PERFORMANCE FOR FINGER-JOINTED WOOD USING FLEXURAL VIBRATION TECHNIQUES.
por: BYEON, HEE-SEOP

Madera estructural de pino silvestre: caracterizacion mecanica
por: Hermoso, E.=700 1 Fernandez-Golfin, J.I.

WARP REDUCTION OF SYP LUMBER BY RESTRAINED DRYING.
por: SHMULSKY, RUBIN

Madera estructural de pino silvestre: caracterizacion mecanica
por: Hermoso, E.=700 1 Fernandez-Golfin, J.I.

RESPONSE SURFACE METHODOLOGY STUDY OF VOCS IN PLYWOOD PRESS EMISSIONS.
por: BARRY, ALPHA ; LEPINE, RICHARD ; LOVELL, RAWLE

STRUCTURAL PERFORMANCE OF FINGER JOINTED BLACK SPRUCE LUMBER WITH DIFFERENT JOINT CONFIGURATIONS.
por: BUSTOS, CECILIA

PERFORMANCE OF FASTENERS IN WOOD FLOUR-THERMOPLASTIC COMPOSITE PANELS.
por: FALK, ROBERT H. ; VOS, DANIEL J. ; CRAMER, STEVEN M.

A METHOD ENABLING THE RECONSTRUCTION OF INTERNAL FEATURES OF LOGS FROM SAWN LUMBER : THE LOG END TEMPLATE.
por: SMITH, GEOFF B.

SAWING SIMULATION OF MARITIME PINE (PINUS PINASTER AIT.) STEMS FOR PRODUCTION OF HEARTWOOD-CONTAINING COMPONENTS.
por: PINTO, ISABEL

Effect of moisture content and density on the mechanical properties of veneer-bamboo zephyr composites.
por: Roh, Jeang-Kwan

WOOD CEMENT COMPATIBILITY OF SOME EASTERN CANADIAN WOODS BY ISOTHERMAL CALORIMETRY.
por: DEFO, MAURICE

HEARTWOOD AND EXTRACTIVE CONTENT OF SCOTS PINE IN SOUTHERN FINLAND MODELS TO APPLY AT HARVEST.
por: UUSITALO, JORI

The influence of short-term thermomechanical densification on the surface wettability of wood veneers /
por: Bekhta, Pavlo

WITHDRAWAL AND BENDING PERFORMANCE OF DOWEL JOINTS IN FURNITURE GRADE PINE PLYWOOD.
por: JILEI ZHANG

TEST METHOD FOR ASSESSING RESISTANCE OF PINE LUMBER AND WAFERBOARD TO MOLD..
por: CLAUSEN, CAROL

Seismic performance of low-rise wood-framed and reinforced masonry buildings with clay masonry veneer /

Carpintería. Teoría y práctica madera, herramientas, taller
por: España. Idea Books
Publicado: (1999)

Predicting lumber volume and grade recovery for Scots pine stems using tree models and sawmill conversion simulation.
por: Moberg, Lennart

TECHNICAL FEASIBILITY OF STRUCTURAL FLAKEBOARD MADE FROM MIXED HARDWOODS AND CYPRESS FROM NORTHERN FLORIDA.
por: SHUPE, TODD F. ; HSE, CHUNG Y. ; PRICE, EDDIE W.

CONTRIBUTION FACTOR OF WOOD PROPERTIES OF THREE POPLAR CLONES TO STRENGTH OF LAMINATED VENEER LUMBER.
por: BAO, FUCHENG

PROPORTIONAL SURFACE DRYING OF SMALL LOBLOLLY PINE CUBES AT 120°C.
por: SHMULSKY, RUBIN

EDGEWISE FLEXURAL PROPERTIES AND MODULUS OF RIGIDITY OF DIFFERENT SIZES OF SOUTHERN PINE LVL AND PLYWOOD.
por: BIBLIS, EVANGELOS J.

EFFECT OF COMPRESSION WOOD ON LEACHING AND FIXATION OF CCA-C TREATED RED PINE.
por: KARTAL, S. NAMI

EFFECTS OF CURING TIME AND END PRESSURE ON THE TENSILE STRENGTH OF FINGER JOINED BLACK SPRUCE LUMBER.
por: BUSTOS, CECILIA

Estructuras de madera
por: Robles Fernández-Villegas, Francisco, et al.
Publicado: (1983)

Estructuras de madera
por: Robles Fernández-Villegas, et al.
Publicado: (1983)

Variaciones de las dimensiones de las traqueidas en madera de Pinus caribaeaMorelet var. hondurencis BARR.ET.GOLF., proveniente de tres plantaciones en la República de Panamá
por: Hidalgo González, Enibeth Irasema
Publicado: (1998)

Comparison of mechanical properties of solid wood and laminated veneer lumber fabricated from Turkish beech, Scotch pine, and Lombardy poplar.
por: Erdil, Yusuf Ziya

ESTIMATED STRESS AND FRICTION DISTRIBUTIONS ON TOOL RAKE FACE IN THE MEDIUM DENSITY FIBERBOARD CUTTING PROCESS.
por: COSTES, JEAN PHILIPPE

Early detection and progression of decay in L-joints and lap-joints in a moderate decay hazard zone.
por: Clausen, Carol A.

EFFECT OF SPECIES, CUTTING DIRECTION, DIMENSIONS, AND TEMPERATURE ON FLAKE DRYING.
por: DEOMANO, EDGAR C.