Elastic properties of hot-pressed aspen strands.

Código QR

Elastic properties of hot-pressed aspen strands.

Detalles Bibliográficos
Autor principal:	Yadama, Vikram
Otros Autores:	Wolcott, Michael P.
Formato:	Artículo
Lenguaje:	Spanish
Materias:	Propiedades elásticas Filamentos Fibras de madera Madera Artículos de revista

Ejemplares similares

Selected properties of wood strand and oriented stranboard from small - diameter southern pine trees.
por: Han, Guangping

Out-of-plane strand deviation in oriented strand composites.
por: Yadama, Vikram

Effects of hot pressing parameters andwax content on the properties of fiberboard made from paper mill sludge.
por: Geng, Xinglian

Optimization of pressing parameters for mechanically surface - densified aspen.
por: Lamason, Clevan

CHARACTERIZATION METHODS FOR ELASTIC PROPERTIES OF WOOD FIBERS FROM MATS FOR COMPOSITE MATERIALS.
por: NEAGU R., CRISTIAN

Selected properties of MDF and flakeboard overlaid with fiberglass mats.
por: Zhiyong, Cai

The excitation and propagation of elastic waves /
por: Hudson, John Arthur 1936-, et al.
Publicado: (1980)

TENSILE AND DIMENSIONAL PROPERTIES OF WOOD STRANDS MADE FROM PLANTATION SOUTHERN PINE LUMBER.
por: QINGLIN WU... [ET AL]

The microstructure and macrostructure of elastic waves in one-dimensional continuous nonhomogeneous media /
por: Ivakin, B. N.
Publicado: (1960)

Effects of press sizes on internal steam pressure during particleboard hot-pressing process.
por: Cai, Zhiyong

EFFECT OF LOAD RATE ON FLEXURAL PROPERTIES OF WOOD PLASTIC COMPOSITES.
por: BRANDT, CHRISTOPHER W.

Effect of press-drying on static bending properties of plantation-grown No. 2 loblolly pine lumber.
por: Stoker, Denise L.

THE EFFECT OF SOME PROCESS VARIABLES ON THE LAP SHEAR STRENGTH OF ASPEN STRANDS UNIFORMLY COATED WITH PMDI RESIN.
por: SMITH, GREGORY D.

KRAFT PULPING RESPONSE AND PAPER PROPERTIES OF WOOD FROM DENSELY STOCKED SMALL-DIAMETER STANDS; SAKET KUMAR ...[ET AL.].

Biological treatment of aspen strands to improve mold resistance and reduce resin consumption of strand panels..
por: Yang, Dian-Qing

SENSITIVITY ANALYSIS OF INTERNAL MAT ENVIRONMENT DURING HOT PRESSING.
por: ZOMBORI, BALAZS G.

Efecto del comportamiento termo-higromecánico a macroescala de madera bajo compresión perpendicular a la fibra en las propiedades nanomecánicas de su estructura celular = Efect of thermo-hygromechanical behaviour at macroscale of wood under compression perpendicular to the in nanomechanical properties of cellular structure /

Increasing mold resistance of strand boards with spruce heartwood.
por: Yang, Dian-Qing

Elastic waves in layered media /
por: Ewing, William Maurice, et al.
Publicado: (1957)

Elastic modulus determination of transgenic aspen using a dynamic mechanical analyzer in static bending mode /

Thermal degradation of wood fibers during hot-pressing of MDF composites. Part I : Relative effects and benefits of thermal exposure.
por: Winandy, Jerrold E.

Elastic wave field extrapolation : redatuming of single and multi-component seismic data /
por: Berkhout, A. J. 1940-, et al.
Publicado: (1989)

SOME PERFORMANCE CHARACTERISTICS OF ASPEN KENAF COMPOSITE BOARDS.
por: BAJWA, DILPREET S.

Rayleigh quasimodes in linear elasticity /
por: Cardoso, Fernando, et al.
Publicado: (1991)

Tensile and thickness swelling properties of strands from Southern hardwoods and Southern pine : Effect of hot-pressing and resin application.
por: Cai, Zhiyong

FTIR-ATR spectroscopic analysis of changes in fiber properties during insulating fiberboard manufacture of beech woo.
por: Muller, Günter

Some physical properties of delignified and compressed Melia dubia wood
por: Kumar, Shailendra,

Moisture effects on in-situ vertical density profile monitoring during OSB hot - pressing.
por: Pablo J. Garcia , Siqun Wang, William W. Moschler

Analysis of strand characteristics and alignment of commercial OSB panels.
por: Chen, Siguo

A LABORATORY TECHNIQUE FOR COATING STRANDS WITH RESIN DROPLETS OF CONTROLLED SIZE AND SPACING.
por: SMITH, GREGORY D.

Effect of strand geometry and wood species on strandboard mechanical properties.
por: Beck, Katherina

Textbook of wood technology; structure, identification, properties, and uses of the comercial woods of the United States and Canadá
por: Panshin, Alexis John
Publicado: (1980)

Mechanical properties of small-scale laminated wood composite poles : effects of taper and webs.
por: Piao, Cheng

OCURRENCE AND LIGNIFICATION OF LIBRIFORM FIBERS IN NORMAL AND TENSION WOOD OF RED AND SUGAR MAPLE.
por: VAZQUEZ COOZ, IRIS

WOOD AND FIBER SCIENCE.

An experimental study of microwave pre-heating of an MDF fiber mat : moisture and temperature distribution and the impact on hot-pressing.
por: Deng, James

Effect of loading rate and thickness on the tensile properties of wood strands.
por: Jeong, Gi Young ... [Et al.]

Properties of experimental particleboard from three Costa Rican hardwoods.
por: Cruz, Alejandro
Publicado: (1976)

Surface characterization of red maple strands after hot water extraction.
por: Jacobo Paredes, Juan

EQUIVALENT CIRCUIT MODELING OF THE DIELECTRIC PROPERTIES OF RUBBER WOOD AT LOW FREQUENCY.
por: KAZI, FEROZ K. M.

Cannot write session to /tmp/vufind_sessions/sess_1vd5krg3tc88ne6gmuhsjprvj3