Visual grading of large structural coniferous sawn timber according to Spanish standard UNE 56544.

QR Code

Visual grading of large structural coniferous sawn timber according to Spanish standard UNE 56544.

Bibliographic Details
Main Author:	Iniguez, Guillermo
Other Authors:	Arriaga, Francisco, Barrett, J. David, Esteban, Miguel
Format:	Article
Language:	Spanish
Subjects:	Madera Materiales Propiedades mecánicas Densidad Rigidez Pino silvestre Clasificación de la madera Artículos de revista

Similar Items

MECHANICAL CHARACTERIZATION OF TIMBER ACCORDING TO EUROPEAN STANDARDS FROM SPANISH PROVENANCES OF SCOTS PINE.
by: HERMOSO PRIETO, E.

Mechanical characterization of timber according European standards from Spanish provenances of Scots Pine
by: Hermoso Prieto, E.=700 1 Fernandez-Golfin Seco, J.I.

Fingerprint traceability of sawn products using industrial measurement systems for x-ray log scanning and sawn timber surface scanning.
by: Jens Flodin, Johan Oja, Anders Gronlund

Comparison between automatic and manual quality grading of sawn softwood.
by: Lycken, Anders

CLASIFICACION VISUAL DE MADERA ESTRUCTURAL DEL PINO LARICIO (PINUS NIGRA ARN.) : COMPARACION DE RESULTADOS USANDO LAS NORMAS UNE 56.544 Y DIN 4.074.
by: DIEZ, R.

WOOD DENSITY AND HYDRAULIC PROPERTIES OF PONDEROSA PINE FROM THE WILLAMETTE VALLEY VS THE CASCADE MOUNTAINS.
by: BOUFFIER, LAURENT A.

Grade defects in hardwoord timber and logs /
by: Lockard, Charles Randall n. 1900, et al.
Published: (1963)

Technical note : a preliminary study on the bending stiffness of chemically treated wood material for structural composite lumber.
by: McConnell, T. Eric

CHECKING OF CCA TREATED RADIATA PINE DECKING TIMBER EXPOSED TO NATURAL WEATHERING.
by: EVANS, PHILIP D.

ORTHOTROPIC BEHAVIOR OF LUMBER COMPOSITE MATERIALS.
by: JANOWIAK, JOHN J.

EFFECTS OF PLANTING DENSITY ON VISUALLY GRADED LUMBER AND MECHANICAL PROPERTIES OF TAIWANIA.
by: WANG, SONG-YUNG

Maximizing the value yield of short-rotation southern pine timber.
by: Carino, Honorio F

WITHDRAWAL AND BENDING PERFORMANCE OF DOWEL JOINTS IN FURNITURE GRADE PINE PLYWOOD.
by: JILEI ZHANG

EDGEWISE FLEXURAL PROPERTIES AND MODULUS OF RIGIDITY OF DIFFERENT SIZES OF SOUTHERN PINE LVL AND PLYWOOD.
by: BIBLIS, EVANGELOS J.

EFFECT OF COMPRESSION WOOD ON LEACHING AND FIXATION OF CCA-C TREATED RED PINE.
by: KARTAL, S. NAMI

PROPORTIONAL SURFACE DRYING OF SMALL LOBLOLLY PINE CUBES AT 120°C.
by: SHMULSKY, RUBIN

A METHOD ENABLING THE RECONSTRUCTION OF INTERNAL FEATURES OF LOGS FROM SAWN LUMBER : THE LOG END TEMPLATE.
by: SMITH, GEOFF B.

THE INFLUENCE OF DRYING METHOD ON THE WARP BEHAVIOR OF NORWAY SPRUCE (PICEA ABIES L. KARST) SAWN TIMBER.
by: KLAIBER, VOLKER

Influence of moisture content on longitudinal, radial, and tangential ultrasonic velocity for two Brazilian wood specie.
by: Gonçalves, Raquel

THE VISUAL GRADING SYSTEM FOR SCOTS PINE LOGS IN RELATION TO THE QUALITY OF SIDEBOARDS PRODUCED; SORIN CHIORESCU, ANDERS GRONLUND.
by: CHIORESCU, SORIN

Variaciones de las dimensiones de las traqueidas en madera de Pinus caribaeaMorelet var. hondurencis BARR.ET.GOLF., proveniente de tres plantaciones en la República de Panamá
by: Hidalgo González, Enibeth Irasema
Published: (1998)

FUNDAMENTALS OF VERTICAL DENSITY PROFILE FORMATION IN WOOD COMPOSITES : PART III. MDF DENSITY FORMATION DURING HOT PRESSING.
by: WANG, SIQUN

VARIATION OF BASIC DENSITY AND BRINELL HARDNESS WITHIN MATURE FINNISH BETULA PENDULA AND B. PUBESCENS STEMS.
by: HERAJARVI, HENRIK

CHARACTERIZING DISTRIBUTION OF GREEN VENEER MOISTURE CONTENT.
by: JIANHE WANG, BRAD

Accelerated drying of plantation grown Eucalyptus cloeziana and Eucalyptus pellita sawn timber /
by: Redman, Adam L.

A MODEL FOR THE SAWING AND GRADING OF LUMBER ACCORDING TO KNOTS.
by: LEMIEUX, HUGO

Predicting lumber volume and grade recovery for Scots pine stems using tree models and sawmill conversion simulation.
by: Moberg, Lennart

DETERMINATION OF BORON DIFFUSION COEFFICIENTS IN WOOD.
by: RA, JONG B.

THE EFFECT OF EXCHANGE RATES ON SOUTHERN PINE EXPORTS.
by: WISDOM, H.W.

PREDICTING THE STRENGTH OF SAWN WOOD PRODUCTS : A COMPARISON BETWEEN X-RAY SCANNING OF LOGS AND MACHINE STRENGTH GRADING OF LUMBER.
by: OJA, JOHAN

INFLUENCE OF SITE ON SAPWOOD AND HEARTWOOD RATIOS OF TURKISH CALABRIAN PINE.
by: BEKTAS, IBRAHIM

Timber products and industries
by: Brown, Nelson Courtlandt, et al.
Published: (1937)

Evaluating warp of 2 by 4s sawn from panels produced through green gluing dimension lumber from samall ponderosa pine logs /
by: Bergman, Richard D.

SPECIMEN ORIENTATION FOR THE CALIBRATION OF DIRECT SCANNING X-RAY W0OD DENSITOMETERS.
by: GUAN, NING

EQUIVALENT CIRCUIT MODELING OF THE DIELECTRIC PROPERTIES OF RUBBER WOOD AT LOW FREQUENCY.
by: KAZI, FEROZ K. M.

WOOD COMPOSITE WARPING MODELING AND SIMULATION.
by: CAI, ZHIYONG

Wood density in conifers
by: Elliott, G. K
Published: (1970)

EFFECT OF SEASONALITY ON BULK DENSITY, MOISTURE CONTENT, AND SPECIFIC GRAVITY OF LOBLOLLY PINE TREE-LENGTH PULPWOOD LOGS IN SOUTHERN ARKANSAS.
by: PATTERSON, DAVID W

Predicting wood decay and density using nir spectroscopy.
by: Stirling, Rod

SIMULACION DEL DETERIORO DE MADERA DE PINUS RADIATA (D. DON) PRODUCIDO POR TERMITAS SUBTERRANEAS (RETICULITERMES SP.) UTILIZANDO ULTRASONIDO.
by: KARSULOVIC, J. T.