|
|
|
|
| LEADER |
05978nam a22003615i 4500 |
| 001 |
000281520 |
| 005 |
20210720083534.0 |
| 007 |
cr nn 008mamaa |
| 008 |
120928s2013 xxu| s |||| 0|eng d |
| 020 |
|
|
|a 9781461442387
|
| 024 |
7 |
|
|a 10.1007/978-1-4614-4238-7
|2 doi
|
| 040 |
|
|
|a Sistema de Bibliotecas del Tecnológico de Costa Rica
|
| 245 |
1 |
0 |
|a Dynamic Behavior of Materials, Volume 1 :
|b Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics /
|c edited by Vijay Chalivendra, Bo Song, Daniel Casem.
|
| 250 |
|
|
|a 1st ed. 2013.
|
| 260 |
# |
# |
|a New York, NY :
|b Springer New York :
|b Imprint: Springer,
|c 2013.
|
| 300 |
|
|
|a X, 597 p. 550 illus., 378 illus. in color. :
|b online resource.
|
| 336 |
|
|
|a text
|b txt
|2 rdacontent
|
| 337 |
|
|
|a computer
|b c
|2 rdamedia
|
| 338 |
|
|
|a online resource
|b cr
|2 rdacarrier
|
| 490 |
1 |
|
|a Conference Proceedings of the Society for Experimental Mechanics Series,
|
| 505 |
0 |
|
|a Correlation of Structural Strain to Tip Vorticity and Lift for a MAV Pliant Membrane Wing -- Deformation Mapping at the Microstructural Length Scale -- Molecular Tailoring of Interfacial Adhesion Using Self-assembled Monolayers -- Micromechanical Characterization of Ductile Damage in DP Steel -- MEMS Device for Fatigue Testing 25 Micrometer Thick Aluminum Specimens -- High Confidence Level Calibration for AFM Based Fracture Testing of Nanobeams -- High Strain Rate Characteristics of Fiber Bragg Grating Strain sensors -- Dynamic Shape and Strain Measurements of Rotating Tire in Time-series -- Measurement of Metallic Adhesion Force-to-Elongation Profile Under High Separation-Rate Conditions -- Prediction of Constraint Parameters Along the 3D Crack Front Under Negative Biaxial Loadings -- Role of Viscoelasticity in Predicting the Shape Memory Effect of Polymers -- Damage Assessment in Syracuse Limestone Specimens by Frequency Analysis of Elastic Emissions -- Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank, ET-137 -- Experimental, Numerical and Analytical Evaluation of Structural Integrity of Experiment Container Subjected to Reduced Gravity Flight Testing -- Use of Fiber Bragg Grating Strain Gages on a Pipeline Specimen Repaired With a CFRE Composite System -- Microstructure in the FSW Butt Joint of Aluminum Alloy AA5083 -- Load History Dependency of Plastic Collapse Behavior of Cracked Piping -- Production of Metal Matrix Composites Using Thixinfiltration Techniques -- Review of Methods for Determining Residual Stresses in Biological Materials -- A Comparison of Residual Stress Measurements on Linear Friction Welds Using the Contour Method and Neutron Diffraction -- Experimental Study of High Speed Ball End milling of Titanium Alloy (Ti-6Al-4V) -- Very High-cycle Fatigue Resistance of Shot Peened High-strength Aluminum Alloys -- The Application of the Combined Creep and Rate-independent Plasticity Model to Turbine Components Life Prediction -- Modified Constitutive Relation Error Strategy for Elastic Properties Identification -- Identification of the Anisotropic Plastic Behaviour of Sheet Metals at Large Strains -- Cohesive Zone Law Extraction From an Experimental Peel Test -- Application of a New Experimental Method to Determine Bi-material Interface Bonding Strength -- Calibration of Barkhausen Noise for Residual Stress Measurement -- Film Residual Stress Assessment Method via Temporarily Thermal Relaxation -- Determining Residual Stresses With the Aid of Optical Interference Techniques -- Interfacial Fracture Toughness and Residual Stress of Thermally Sprayed Coatings -- Design of Ultrasonic Probe Configuration Using Finite-difference Time Domain Simulation -- Absorbed vs. Released Energy in the Cracking Process of Heterogeneous Materials Under Compression -- Detailed Measurements of Thread Deformation and Failure in Thin Walled Aluminum Alloy Joints -- Experimental Characterization of Integral Invariants in Wood Specimen Using the full Field Optical Technique -- Stress intensity factors for viscoelastic axisymmetric problems applied to wood -- Simulation of Interference Fitted Joint Strength as Used in Hot Rolling Work Rolls -- Modelling of Nosing for the Assembly of Aerospace Bearings -- Multi-axial Quasi-static Strength of a Clinched Sheet Metal Assembly -- Simplified Calculation Method of the Torsion Effect on the Seismic Behavior of Timber Buildings -- Experimental Analysis of the Semi-rigidity Joint in the Standardized Timber Beam -- Nano-Macro Correlation of Nano-Silica Concrete -- Experimental results of green wood slice under natural drying -- Structural Health Monitoring in the Area of Coal Exploitation -- Thickness Effect on Cross-ply GLARE 5 FML Beams Subjected to Ballistic Impact -- Hole-drilling Residual Stress Measurement in an Intermediate Thickness Specimen -- Effects of Strain's Error on Residual Stresses Calculated by HDM -- Hole-drilling Residual Stress Measurement With Artifact Correction Using Full-field DIC -- Anisotropic and Pressure-dependent Plasticity Modeling for Residual Stress Prediction -- Simulation of Triaxial Residual Stress Mapping for a Hollow Cylinder -- Use of Vision-based Methods for Measurement of Mechanical Properties of Exhaust Catalysts -- Design & Development of Ring Shaped Force Transducers -- Novel High Resolution Sensor Concept -- Development of a Test Simulator to Perform Optimized Experiment Design -- Interval identification of constitutive parameters of fractional viscoelastic models.
|
| 650 |
|
0 |
|a Mechanics.
|
| 650 |
|
0 |
|a Mechanics, Applied.
|
| 650 |
|
0 |
|a Materials science.
|
| 650 |
1 |
4 |
|a Theoretical and Applied Mechanics.
|
| 650 |
2 |
4 |
|a Classical Mechanics.
|
| 650 |
2 |
4 |
|a Materials Science, general.
|
| 700 |
1 |
|
|a Chalivendra, Vijay.
|e editor.
|
| 700 |
1 |
|
|a Song, Bo.
|e editor.
|
| 700 |
1 |
|
|a Casem, Daniel.
|e editor.
|
| 710 |
2 |
|
|a SpringerLink (Online service)
|
| 773 |
0 |
|
|t Springer eBooks
|
| 900 |
|
|
|a Libro descargado a ALEPH en bloque (proveniente de proveedor)
|