Proceedings of the 36th International MATADOR Conference /

Bibliographic Details
Corporate Author: SpringerLink (Online service)
Other Authors: Hinduja, Srichand. (Editor), Li, Lin. (Editor)
Format: eBook
Language:English
Published: London : Springer London : Imprint: Springer, 2010.
Edition:1st ed. 2010.
Subjects:
Table of Contents:
  • 1-1. Robust Control Strategy of Fluid Dispensing Process for Solid Freeform Fabrication of Tissue Engineered Hydrogel Scaffold
  • 1-2. An innovative approach for the fabrication of highly conductive nanocomposites with different carbon
  • 1-3. Analysis of local field enhancement including tip interaction for the application to nano-manipulation using FDTD calculations
  • 2-1. Numerical Simulation of the Four Roll Bending Process
  • 2-2. Investigation on the Process Parameters and Process Window of Three-Roll-Push-Bending
  • 2-3. Casting of Aluminium Alloy Strop by Improved Single-Roll Caster
  • 2-4. Casting of Al-Si-SiCp composite alloy strip by a vertical type twin roll caster
  • 2-5. Casting of aluminium alloy clad strip using a vertical type tandem twin roll caster
  • 2-6. Micro-forming of aluminum alloy by cold rolling
  • 2-7. Rapid shape measurement of micro deep drawing parts by means of digital holographic contouring
  • 2-8. Fracture Limits of Metal Foils in Micro Forming
  • 2-9. A theoretical model for the velocity field of the extrusion of shaped sections taking into account the variation of the axial component
  • 2-10. A theoretical model for the material flow for the forward extrusion of complicated and non-symmetric sections
  • 2-11. An Optimization Algorithm for Improving Combined Multi-Stage Deep-Drawing and Ironing Processes of Axisymmetric Components. Analysis and Experimentation
  • 2-12. Nanofinishing Process for 3D Freeform Surfaces Using Ball End MR Finishing Tool
  • 2-13. Pressure Distribution in Cold Rolling of Turbo-engine Thin Compressor Blades
  • 2-14. Determination of the duty cycle in thermoset pultrusion
  • 2-15. Development of New Press-Forming Process for a Screw-Threaded Fuel Filler Pipe
  • 2-16. Roller Hemming: A New Simulation Model for the Automotive Industry
  • 2-17. Control of the uniformity of direct electrical heating for Rotational Moulding
  • 3-1. High Efficiency Deep Grinding, an Application withconventional wheels
  • 3-2. Detection of High and Low Temperature in the Grinding Zone using Laser Irradiation Technique
  • 3-3. Investigation of Influences of Wheel Speed on Root Geometrical Dimension of Gas Turbine Blade
  • 3-4. Ultra-fine Finishing of Metallic surfaces with Ice Bonded Abrasive Polishing Process
  • 3-5. Plane surface grinding with application of Minimum Quantity Lubrication (MQL)
  • 3-6. Study of the Behavior of Air Flow around a Grinding Wheel under the Application of Pneumatic Barrier
  • 4-1. A cutting plane algorithm for solving single machine scheduling problems with uncertain sequence-dependent setup times
  • 4-2. A Knowledge-Based Engineering System for Assembly Sequence Planning
  • 4-3. Product Family Modeling and Optimization Driven by Customer Requirements
  • 4-4. Transparency in Production by Monitoring the Condition of Molds, Dies and Machines
  • 4-5. Simulation Modelling of Product-Service Systems: the Missing Link
  • 4-6. RFID Deployment at an Airport: A Simulation Study
  • 5-1. Failure knowledge based decision-making in product quality
  • 5-2. Predicting the End-Of-Life of Defence Electronic Systems at the Conceptual Design Stage
  • 5-3. Design of Multi-Span Microfixturing Cell for Parallel Assembly of Microparts Using Electrothermally Actuated Microclamps
  • 5-4. An Evaluation Method Based on Multiple Quality Characteristics for CNC Machining Center using Fuzzy Matter Element
  • 5-5. Design of a Meso-scale 3-axis Milling with Nanometer Accuracy
  • 5-6. A Novel Concept to Design Machine Tool Structures using Multifunctional Materials
  • 5-7. Design Synthesis of a three legged SPS Parallel Manipulator
  • 5-8. Piezo-Metal-Composites as Smart Structures
  • 5-9. A methodology for Engineering Design Change Managment Using Modelling and Problem Solving Techniques
  • 5-10. Modeling and Analysis of the strength of Adhesively Bond CFRP-Aluminium T-joints
  • 6-1. Modelling of Machine Tapping with Straight Flute Taps.-.