Dynamic Behavior of Materials, Volume 1 : Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics /
| Autor Corporativo: | |
|---|---|
| Otros Autores: | , , |
| Formato: | eBook |
| Lenguaje: | English |
| Publicado: |
New York, NY :
Springer New York : Imprint: Springer,
2013.
|
| Edición: | 1st ed. 2013. |
| Colección: | Conference Proceedings of the Society for Experimental Mechanics Series,
|
| Materias: |
Tabla de Contenidos:
- Correlation of Structural Strain to Tip Vorticity and Lift for a MAV Pliant Membrane Wing
- Deformation Mapping at the Microstructural Length Scale
- Molecular Tailoring of Interfacial Adhesion Using Self-assembled Monolayers
- Micromechanical Characterization of Ductile Damage in DP Steel
- MEMS Device for Fatigue Testing 25 Micrometer Thick Aluminum Specimens
- High Confidence Level Calibration for AFM Based Fracture Testing of Nanobeams
- High Strain Rate Characteristics of Fiber Bragg Grating Strain sensors
- Dynamic Shape and Strain Measurements of Rotating Tire in Time-series
- Measurement of Metallic Adhesion Force-to-Elongation Profile Under High Separation-Rate Conditions
- Prediction of Constraint Parameters Along the 3D Crack Front Under Negative Biaxial Loadings
- Role of Viscoelasticity in Predicting the Shape Memory Effect of Polymers
- Damage Assessment in Syracuse Limestone Specimens by Frequency Analysis of Elastic Emissions
- Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank, ET-137
- Experimental, Numerical and Analytical Evaluation of Structural Integrity of Experiment Container Subjected to Reduced Gravity Flight Testing
- Use of Fiber Bragg Grating Strain Gages on a Pipeline Specimen Repaired With a CFRE Composite System
- Microstructure in the FSW Butt Joint of Aluminum Alloy AA5083
- Load History Dependency of Plastic Collapse Behavior of Cracked Piping
- Production of Metal Matrix Composites Using Thixinfiltration Techniques
- Review of Methods for Determining Residual Stresses in Biological Materials
- A Comparison of Residual Stress Measurements on Linear Friction Welds Using the Contour Method and Neutron Diffraction
- Experimental Study of High Speed Ball End milling of Titanium Alloy (Ti-6Al-4V)
- Very High-cycle Fatigue Resistance of Shot Peened High-strength Aluminum Alloys
- The Application of the Combined Creep and Rate-independent Plasticity Model to Turbine Components Life Prediction
- Modified Constitutive Relation Error Strategy for Elastic Properties Identification
- Identification of the Anisotropic Plastic Behaviour of Sheet Metals at Large Strains
- Cohesive Zone Law Extraction From an Experimental Peel Test
- Application of a New Experimental Method to Determine Bi-material Interface Bonding Strength
- Calibration of Barkhausen Noise for Residual Stress Measurement
- Film Residual Stress Assessment Method via Temporarily Thermal Relaxation
- Determining Residual Stresses With the Aid of Optical Interference Techniques
- Interfacial Fracture Toughness and Residual Stress of Thermally Sprayed Coatings
- Design of Ultrasonic Probe Configuration Using Finite-difference Time Domain Simulation
- Absorbed vs. Released Energy in the Cracking Process of Heterogeneous Materials Under Compression
- Detailed Measurements of Thread Deformation and Failure in Thin Walled Aluminum Alloy Joints
- Experimental Characterization of Integral Invariants in Wood Specimen Using the full Field Optical Technique
- Stress intensity factors for viscoelastic axisymmetric problems applied to wood
- Simulation of Interference Fitted Joint Strength as Used in Hot Rolling Work Rolls
- Modelling of Nosing for the Assembly of Aerospace Bearings
- Multi-axial Quasi-static Strength of a Clinched Sheet Metal Assembly
- Simplified Calculation Method of the Torsion Effect on the Seismic Behavior of Timber Buildings
- Experimental Analysis of the Semi-rigidity Joint in the Standardized Timber Beam
- Nano-Macro Correlation of Nano-Silica Concrete
- Experimental results of green wood slice under natural drying
- Structural Health Monitoring in the Area of Coal Exploitation
- Thickness Effect on Cross-ply GLARE 5 FML Beams Subjected to Ballistic Impact
- Hole-drilling Residual Stress Measurement in an Intermediate Thickness Specimen
- Effects of Strain's Error on Residual Stresses Calculated by HDM
- Hole-drilling Residual Stress Measurement With Artifact Correction Using Full-field DIC
- Anisotropic and Pressure-dependent Plasticity Modeling for Residual Stress Prediction
- Simulation of Triaxial Residual Stress Mapping for a Hollow Cylinder
- Use of Vision-based Methods for Measurement of Mechanical Properties of Exhaust Catalysts
- Design & Development of Ring Shaped Force Transducers
- Novel High Resolution Sensor Concept
- Development of a Test Simulator to Perform Optimized Experiment Design
- Interval identification of constitutive parameters of fractional viscoelastic models.